GREENE COUNTY SURPLUS CORP.
OLD PLANK ROAD             COXSACKIE (ALBANY), NEW YORK
TO BE SOLD ON THE PREMISES AND BY LIVE INTERNET BIDDING
THURSDAY, APRIL 24^TH      AT 11:00 A.M.

Lot	Qty.	Pic	Description
1			5' JOHNSON BAR
2	3		CHAIN BINDERS
3			PORTOR CABLE ELEC. 6" CIRCULAR SAW, 1 PH.
4			B & D ELEC. H.D. SABER SAW
5			SKIL 3/8" ELEC. DRILL
6			1/2" ELEC. IMPACT WRENCH
7			B & D 7" RIGHT ANGLE GRINDER, 1 PH.
8			AEG 12" ELEC. CHOP SAW, 1 PH.
9			8" x 16" DEMAGNETIZER, 1 PH.
10			PENDANT SCALE, 10,000# CAP.
11			REDDY HEATER KEROSENE TORPEDO HEATER, 55,000 BTU CAP.
12			REDDY HEATER KEROSENE TORPEDO HEATER, 35,000 BTU CAP.
13			BLACK DIAMOND PRECISION DRILL GRINDER, M/N 2B, 1/3 H.P., 1 PH.
14			REMEX COLLET SPINNER, M/N AP-100, W/ COLLET SET & CASE
15	28		ASS'T. 5C COLLETS
16	65		ASS'T. 5C COLLETS
17	65		ASS'T. 5C COLLETS
18	65		ASS'T. 5C COLLETS
19			PROSSER 6" D.E. PED. CARBIDE GRINDER, 1/2 H.P., 1 PH., M/N AP, S/N 2579
20			DELTA 6" D.E. PED. GRINDER, 1/2 H.P., 1 PH., M/N 23415
21			CRAFTSMAN 6" D.E. PED. GRINDER, 1/3 H.P., 1 PH.
22			WALKER TURNER 6" D.E. BENCH GRINDER, 1/3 H.P., 1 PH., W/ 36" WORKTABLE
23			CRAFTSMAN 10" RADIAL ARM SAW, 2 1/2 H.P., 1 PH.
24			WILTON 6" BELT /10" DISC SANDER, 1 PH.
25			LITTLE BLACKSMITH 6" X 6" MANUAL CORNER NOTCHER, M/N 43, W/ STAND
26			HOLTZ 14" PED. DRILL PRESS, 3/4 H.P., 1 PH., M/N F-14-12F
27			ORBIT 14" PED. DRILL PRESS, 1/2 H.P., 1 PH., M/N OR-1412F
28			AMROX 15" PED. DRILL PRESS, 1/3 H.P., 1 PH., M/N SF-15
29			15" FLOOR TYPE DRILL PRESS, 1/2 H.P., 1 PH.
30			HASKINS PORT. FLEX GRINDER, 2 H.P., 1 PH.
31			HASKINS PORT. FLEX GRINDER, 2 H.P., 1 PH.
32			PORT. FLEX GRINDER, 1 H.P., 1 PH.
33			BLISS 8 TON OBI PUNCH PRESS, M/N 8, 1/3 H.P., 3 PH.
34			30" MANUAL BRAKE
35			30" MANUAL BRAKE
36			30" MANUAL BRAKE
37			VERMETTE PORT. MANUAL LIFT, 500# CAP., M/N 520
38			SIGNODE PORT. STRAPPING MACH., M/N MS-B, S/N 73172, 1 PH.
39			NIAGARA 6' POWER SHEAR, 14 GAGE SOFT STEEL CAP., 5 H.P., 3 PH.
40			CHICAGO 8' MANUAL BRAKE, 18 GAGE SOFT STEEL CAP., M/N 818, S/N 90531
41			PEXTO 24" MANUAL BRAKE, W/ BACK GAGE & STAND, M/N PX24A, S/N 6/73
42			PEXTO 6' POWER SHEAR, 16 GAGE SOFT STEEL CAP., M/N U-172C, S/N F8732/37, W/ BACK GAGE, 5 H.P., 3 PH.
43			KEARNEY TRECKER VERT. MILLING MACH., M/N 2CH/205CH, 14" X 50" T-SLOT TABLE, 5 H.P., 3 PH.
44	2		ROCKWELL 20" & 17" BENCH TYPE DRILL PRESSES, 1 H.P., 3 PH., W/ 6' H.D. WORKTABLE
45			BRIDGEPORT VERT. MILLING MACH., 9" X 42" T-SLOT TABLE, W/ POWER FEED, S/N 69353, 1 H.P., 3 PH.
46			CHICAGO 5' MECHANICAL PRESS BRAKE 34 TON CAP., 3 PH., M/N 334, S/N L-3965
47			30" DIA. X 30" DEEP MOTORIZED BARREL TUMBLER, 5 H.P., 3 PH.
48			DO-ALL 16" VERT. BANDSAW, M/N ML, S/N 5014749, 3 PH., W/ GRIND & WELD ATTACH.
49			PERKINS 15 TON OBI PUNCH PRESS, M/N 30D, S/N 19855, 1/2" STROKE, 1 H.P., 3 PH.
50			DO-ALL SURFACE GRINDER, W/ POWER FEED, 10" X 24" MAG. CHUCK, S/N G10-45979, 3 PH.
51			VICTOR VERT. MILLING MACH., 9" X 48" T-SLOT TABLE, POWER FEED, D.R.O., S/N K2V960686, 3 H.P., 3 PH.
52			GROB 18" VERT. BANDSAW, M/N NS-18, S/N 1084, 3 PH., W/ GRIND & WELD ATTACH.
53			BRIDGEPORT VERT. MILLING MACH., 9" X 32" T-SLOT TABLE, W/ POWER FEED, 1/2 H.P., 3 PH.
54			B&S SURFACE GRINDER, W/ POWER FEED, 6" X 18" MAG. CHUCK, M/N 2, 3 PH.
55			CLAUSING 18" PED. DRILL PRESS, 1 1/2 H.P., 1 PH., M/N 1815
56			WALKER TURNER 20" PED. DRILL PRESS, 1 H.P., 1 PH., S/N 52E3A4
57			ROCKWELL 20" VERT. BANDSAW, M/N 20, 3 PH., W/ GRIND & WELD ATTACH.
58			DO-ALL 16" VERT. BANDSAW, M/N 16SFP, S/N 79-54282, 3 PH., W/ GRIND & WELD ATTACH.
59			DO-ALL 16" VERT. BANDSAW, M/N ML, S/N 446864, 3 PH., W/ GRIND & WELD ATTACH.
60			ALBERT 4-POST HYD. HOT MOLDING PRESS, 200 TON CAP., 36" X 36" X 36" BED, 3 PH.
61			RELIABLE 4-POST HYD. HOT MOLDING PRESS, 50 TON CAP., 18" X 18" X 30" BED, 5 H.P., 3 PH.
62			RELIABLE 4-POST HYD. HOT MOLDING PRESS, 50 TON CAP., 18" X 18" X 30" BED, 5 H.P., 3 PH.
63			HYD. PUMP, W/ 20 H.P. MOTOR
64			HYD. PUMP, W/ 15 H.P. MOTOR
65			SOUTHBEND ENGINE LATHE, 16" X 120" B.C., M/N CLK195H, S/N 11550HKY15, W/ 4 JAW CHUCK, CENTER REST & TAILSTOCK
66			BUFFALO 18" PED. DRILL PRESS, 1 H.P., 3 PH., M/N 18, W/ PROCUNIER TAPPING HEAD
67			CLAUSING 20" PED. DRILL PRESS, 1 H.P., 1 PH., M/N 22V-1
68			ROYAL 18" PED. DRILL PRESS, 1 H.P., 3 PH., M/N 18
69			BACKUS 12" H.D. CHOP SAW, 5 H.P., 3 PH., W/ STAND
70			FAMCO ARBOR PRESS, M/N 3 1/2 R, W/ STAND
71			36" X 48" X 6" BLACK GRANITE SURFACE PLATE, W/ MET. STAND
72			CAMPBELL NIBBLER, M/N 2524, 24" THROAT, 1/4" CAP., 2 H.P., 3 PH.
73			CAMPBELL NIBBLER, M/N 2524, 24" THROAT, 1/4" CAP., 2 H.P., 3 PH.
74			AMERICAN STEEL LINE 16" COIL FEEDER, 1,000# CAP., M/N 60, S/N 1929, 3 PH.
75			BUFFALO #1 UNIVERSAL IRONWORKER, M/N 1UW-20", S/N W-8080, 3 PH., CAPACITIES - 1/2" SHEAR, 7/8" X 5/8" PUNCH, 4" X 4" X 3/8" BARCUTTER, 3" X 3" X 3/8" TEES, 1 5/8" ROUNDS, 3" X 3" X 1/4" ANGLES, 1 1/2" SQUARE, 6 5/8 FLATS
76			BUFFALO 15" BENCH TYPE DRILL PRESS, 1 PH., W/ 5' MET. TABLE
77			12" H.D. D.E. PED. GRINDER, 3 PH.
78			DELTA 18" PED. DRILL PRESS, 3/4 H.P., 3 PH.
79			ALPHIL SPOT WELDER, M/N BW, S/N 6/80, 15 KVA, 6" THROAT, 3 PH.
80			ALPHIL SPOT WELDER, M/N BW, S/N 850, 15 KVA, 6" THROAT, 3 PH.
81			TORIT DUST COLLECTOR, M/N 60-CAB, S/N TG062974, 1 PH.
82			CHICAGO 8' MANUAL BRAKE 18 GAGE SOFT STEEL CAP., M/N 818, S/N 94797
83			48" DIA. WINDER
84			48" DIA. WINDER
85			48" DIA. WINDER
86			48" DIA. WINDER
87			36" DIA. WINDER
88			SPEED-AIRE HORIZ. TWIN STAGE AIR COMPR., 10 H.P., 3 PH.
89			DO-ALL 26" VERT. BANDSAW, M/N V-26, S/N 26512445, 3 PH., W/ GRIND & WELD ATTACH.
90			PRESS RITE OBI PUNCH PRESS, M/N 1-EE, S/N 3279, 3/4 H.P., 1 PH.
91			DURANT 12" COIL FEEDER & STRAIGHTNER, M/N C1Y250, S/N 32692YF, 1 H.P., 3 PH.
92			RELIABLE 4-POST HYD. HOT MOLDING PRESS, 150 TON CAP., 24" X 24" X 36" BED, 3 PH.
93			TOS ENGINE LATHE, M/N SU-63A, S/N 047626, 25" SWING X 6' BED, TAIL STOCK, CENTER REST & TOOL HOLDER, 15 H.P., 3 PH.
94			KALAMAZOO HORIZ. METAL CUTTING BANDSAW, 12" X 20" CAP., 3 H.P., 3 PH., M/N H-12B, S/N H314666, W/ 16" X 5" ROLLER POWER FEED, W/ COOLANT SYSTEM
95			WHITNEY 6' MANUAL BRAKE, 14 GAGE SOFT STEEL CAP.
96			PEXTO 3' POWER SHEAR, 16 GAGE SOFT STEEL CAP., M/N 137L, S/N 12/65
97			PEXTO 3' POWER SHEAR, 16 GAGE SOFT STEEL CAP., M/N 137L, S/N 11/67
98			PEXTO 3' MANUAL SHEAR, 16 GAGE SOFT STEEL CAP., M/N 137K, S/N 11/57
99			PEXTO 3' MANUAL SHEAR, 16 GAGE SOFT STEEL CAP.
100			GORTON ENGRAVING MACH., 3/4 H.P., 1 PH., M/N PI-2
101			SCIAKY SPOT WELDER, M/N EPQ 110-30-12, S/N 10240, 50 KVA, 24" THROAT, 1 PH.
102			STERLING SPOT WELDER, M/N 2SP24-ASB, S/N 2794, 40 KVA, 24" THROAT, 3 PH.
103			ALPHIL SPOT WELDER, M/N RFTG, S/N 4813, 30 KVA, 24" THROAT, 3 PH.
104			ALPHIL SPOT WELDER, M/N RFTG, 30 KVA, 24" THROAT, 3 PH.
105			ALPHIL SPOT WELDER, M/N RFTG, S/N 5026, 30 KVA, 24" THROAT, 3 PH.
106			ALPHIL SPOT WELDER, M/N RFTG, S/N 5114, 30 KVA, 24" THROAT, 3 PH.
107			EISLER SPOT WELDER, M/N 2155, S/N 54633, 15 KVA, 18" THROAT, 3 PH.
108			ALPHIL SPOT WELDER, M/N G-18, S/N 1983, 30 KVA, 20" THROAT, 3 PH.
109			LARKIN SPOT WELDER, M/N T-12, S/N 270, 30 KVA, 20" THROAT, 3PH.
110			NIAGARA POWER CIRCLE SHEAR, 8" THROAT, M/N 172, S/N S1459A
111			GENERAL ELEC. STAPLER MACH., S/N 1-1964, 1/2 H.P., 1 PH.
112			ARBORGA MASKINER VERT. MILLING MACH., 9" X 22" TABLE, M/N FM-825, 1 1/5 H.P., 3 PH., S/N 142845
113			BLISS 22 TON OBI PUNCH PRESS, M/N 20, 3" STROKE, 3 PH.
114			INDUSTRIAL 12 TON OBI PUNCH PRESS, M/N A, 3/4 H.P., 3 PH.
115			PERKINS 12 YON OBI PUNCH PRESS, M/N 300-B, S/N 16415, 1/2" STROKE, 1 H.P., 3 PH.
116			PERKINS 15 TON OBI PUNCH PRESS, M/N 34, S/N 19910, 1/2" STROKE, 1 H.P., 3 PH.
117			V & O 5 TON OBI PUNCH PRESS, M/N 41, S/N 41N-34, 2 H.P., 3 PH.
118			PERKINS 12 TON OBI PUNCH PRESS, 1 1/2" STROKE, 1/2 H.P., 3 PH.
119			PERKINS 5 TON OBI PUNCH PRESS, M/N JUNIOR 10, 1/2" STROKE, 1/2 H.P., 3 PH.
120			MSC HORIZ. METAL CUTTING BANDSAW, 9" X 16" CAP., 1 PH.
121			KALAMAZOO PORT. HORIZ. METAL CUTTING BANDSAW, 9" X 12" CAP., 3/4 H.P., 3 PH., W/ COOLANT SPRAYER
122			KALAMAZOO PORT. HORIZ. METAL CUTTING BANDSAW, 8" X 16" CAP., M/N P43, 1 PH.
123			PEXTO MANUAL CIRCLE SHEAR, 20 GAGE SOFT STEEL CAP., 9" THROAT, M/N 200C, S/N 1259
124			ROUSELLE 25 TON OBI PUNCH PRESS, M/N 3G, S/N 563, AIR OVER MECH. PALM CONTROLS, 2 H.P., 3 PH.
125			ROUSELLE 60 TON OBI PUNCH PRESS, M/N 6, S/N 16635, AIR OVER MECH. PALM CONTROLS, 3" STROKE, 5 H.P., 3 PH.
126			BLISS 45 TON OBI PUNCH PRESS, M/N C-45, AIR OVER MECH. PALM CONTROLS, 3" STROKE, 7 1/2 H.P., 3 PH.
127			NIAGARA 45 TON OBI PUNCH PRESS, M/N A-45, S/N 40814, AIR CLUTCH, PALM CONTROLS, 3 1/2" STROKE, 5 H.P., 3 PH.
128			JOY TWISTAIR ROTARY SCREW HORIZ. AIR COMPR., 20 H.P., 3 PH., M/N TA-020TANIC, S/N 124771
129			I.R. HORIZ. TWIN STAGE AIR COMPR., 5 H.P., 3 PH., M/N 253, S/N 3OT-83355
130			STONE 10" CHOP SAW, M/N M14, 3 1/2 H.P., 3 PH.
131			LINCOLN TAG-A-LONG SHIELD ARC WELDER, 200 AMP., M/N SA-200 F-163, S/N A-868250
132			ALLIS CHALMERS FORKLIFT, 12,000# CAP., PROPANE, SOLID TIRES, ROPS, 2-STAGE MAST, 0484 HRS., M/N F120-18-2RS, S/N 32502000
133			36" X 96" PORT. ELEC. SCISSOR LIFT, 1 PH.
134			JOB LOT
135			MAZAK CNC VERT. MACHINING CENTER, M/N VQC-20/50 B, S/N 59898, 24 ATC, 22" X 48" T-SLOT TABLE, 3 PH., W/ MAZATROL M-2 CONTROLS
136			1987 FORD F-350 CUSTOM 12' STAKE BODY TRUCK, A/T, V-8, S/A, DUAL REARS, CLOTH INTERIOR, 10,000 GVWR, 22,233 MILES, VIN# 1FDJF37H9HKB01016
137			HYSTER FORKLIFT, 10,000# CAP., DIESEL, PNEU. TIRES, DUAL FRONT WHEELS, ROPS 3-STAGE MAST, M/N H90XL, 7,430 HRS.
138			CLARK FORKLIFT, 3,000# CAP., PROPANE, SOLID TIRES, ROPS, SIDE SHIFT, 3-STAGE MAST, M/N CMC-18, 2,719 HRS.
139			HYSTER FORKLIFT, 6,000# CAP., PROPANE, SOLID TIRES, ROPS, 2-STAGE MAST, 0875 HRS.
140			WHITE FORKLIFT, 5,000# CAP., PROPANE, SOLID TIRES, ROPS, 2-STAGE MAST, 0990 HRS.
141			SET 4' FORK EXT.'S

TERMS OF SALE:
25% DEPOSIT CASH OR CERTIFIED CHECK
12% BUYERS PREMIUM APPLIES ON ALL ONSITE PURCHASES
15% BUYERS PREMIUM APPLIES ON ALL INTERNET PURCHASES
OTHER TERMS TO BE ANNOUNCED AT TIME OF SALE

INSPECTION: WEDNESDAY, APRIL 23RD - 10:00 A.M. TO 4:00 P.M.
& MORNING OF SALE - 8:30 A.M TO 11:00 A.M.

LEASE FINANCING Maximize your bidding power! Get pre-approved for 5 Thousand to 3 Million dollars in lease financing with no financials required for up to $100k. For more information call David Johnson at Harbour Capital at 866-735-2662. To apply online go to: www.harbourcapital.com