A

P  U  B  L  I  C U  C  T  I  O

N

 SEWING MACHINE MANUFACTURER
• CNC MACHINING CENTERS •
• CNC LATHE • MILLING MACHINES •
• GRINDERS • LATHES • HONES • WELDERS •
• SAWS • DRILLS • PRESSES • BENDERS •
• PLATING EQUIPMENT • COMPRESSORS • FURNACES •
• CRANES • HANDLING & PLANT SUPPORT EQUIPMENT •
• STEEL STOCK • OFFICE EQUIPMENT •
INDUSTRIAL REAL ESTATE*

240 DAY STREET
NEWINGTON, CONNECTICUT
TO BE SOLD ON THE PREMISES
WEDNESDAY, SEPTEMBER 22^ND AT 10:30 A.M.

Lot	Qty.	Description
1		NUTTING PORT. JOHNSON BAR
2		5' PRY BAR
3		6' PRY BAR
4		PEANUT DISPENSER
5		DAYTON PORT. WET/DRY VAC.
6		DAYTON PORT. WET/DRY VAC.
7		DAYTON PORT. WET/DRY VAC.
8		DAYTON PORT. WET/DRY VAC.
9		DAYTON PORT. WET/DRY VAC.
10		GATORADE WATER DISPENSER
11		GM YOST H.D. BENCH VISE
12		NIAGARA MANUAL BEADER
13		PIPE VISE
14		DUFF-HORTON RATCHET JACK
15		JENCO ANALOG PH METER
16		MARKSON DIG. PH METER
17		FLUKE MULTIMETER
18		BARHARACH COMPRESSION TEST KIT
19		G.E. A/C VOLT AMMETER
20		A/C VOLT AMMETER
21		FLUKE K/J 52 THERMOMETER
22		AMETEK DIG. TACOMETER, M/N 1726
23		BK PRECISION DYNASCAN METER, M/N 177-VTVM
24		MAG LIGHT, W/ EXTEND ARM
25		4" SWIVEL SHOP VISE
26		4" SWIVEL SHOP VISE
27		4" SWIVEL SHOP VISE
28		4" SWIVEL SHOP VISE
29		4" SWIVEL SHOP VISE
30		CHATILLON TRACTION DYNAMOMETER, M/N TD5, 4,000# CAP.
31		PIPE HAND BENDER
32		PIPE HAND BENDER
33		PIPE HAND BENDER
34		GREENLEE HYD. PORTA-POWER
35		CM LEVER OPERATED CHAIN HOIST, 3-TON CAP.
36	2	ASS'T. BREAKER BARS
37		BILLING 3/4" DRIVE RATCHET SET
38		HILLMAN PORT. RIGGING DOLLY SET, 8-TON CAP.
39		CHAIN RIGGING FIXTURE
40		5' CHAIN
41		NYLON RIGGING SLING
42		CABLE RIGGING CHOKER
43	6	NYLON RIGGING SLINGS
44	4	NYLON RIGGING SLINGS
45	4	SEC.'S 3' X 8' X 3' MET. SHELVING
46	4	SEC.'S 3' X 6' X 3' MET. SHELVING
47		3' X 8' X 3' MET. SHELVING
48		DAYTON 1" BELT SNADER, M/N 6Z116A, 115V, 1 PH.
49		DAYTON 1" BELT SANDER, 1/2 H.P., 115V, 1 PH.
50		LEESON 1" BELT SANDER, 1/2 H.P., 115V, 1 PH.
51		1" BELT SANDER, 115V, 1 PH.
52		1" BELT SANDER, 115V, 1 PH.
53		1" BELT SANDER, 115V, 1 PH.
54		ZERO MAX. MICRO BELT SANDER, 115V, 1 PH.
55		DAYTON 6" D.E. BENCH GRINDER, M/N 4Z123F, 115V, 1 PH.
56		DAYTON 6" D.E. BENCH GRINDER, M/N 4Z123F, 115V, 1 PH.
57		ELECTRO-MECHANO 8" DRILL PRESS, M/N 105W
58		ELECTRO-MECHANO 8" DRILL PRESS, M/N 105W
59		ELECTRO-MECHANO 8" DRILL PRESS, M/N 105W
60		ELECTRO-MECHANO 8" DRILL PRESS, M/N 105W
61		BLACK DIAMOND PRECISION DRILL GRINDER, M/N BW90A, 115V, 1 PH.
62		RICKERT-SHAFER TAPPING MACH., M/N 3-16MD, S/N B00976, 115V, 1 PH.
63		H.D. RIGHT ANGLE DRILL, 1/4 H.P., 1 PH.
64		H.D. RIGHT ANGLE DRILL, 1/4 H.P., 1 PH.
65		H.D. RIGHT ANGLE DRILL, 1/4 H.P., 1 PH.
66		H.D. RIGHT ANGLE DRILL, 1/4 H.P., 1 PH.
67		H.D. RIGHT ANGLE DRILL, 1/4 H.P., 1 PH.
68		H.D. RIGHT ANGLE DRILL, 1/4 H.P., 1 PH.
69		H.D. RIGHT ANGLE DRILL, 1/4 H.P., 1 PH.
70		H.D. RIGHT ANGLE DRILL, 1/4 H.P., 1 PH.
71		G.E. DRILL ATTACH., 115V, 1 PH.
72		CRAFTSMAN 10" DRILL PRESS, 1/2 H.P., 1 PH., BENCH TYPE
73		TOLEDO PLATFORM SCALE, M/N 2020, 30# CAP.
74		HOWE RICHARDSON KWIK-COUNT OVER/UNDER SCALE, 20# CAP.
75		PITNEY BOWES POSTAGE SCALE, M/N S-122, S/N 1473
76		PENNSYLVANIA OVER/UNDER SCALE, M/N C-222-9, S/N 56486, 50# CAP.
77		PENNSYLVANIA OVER/UNDER SCALE, M/N C-222-9, S/N 56486, 50# CAP.
78		HOWE RICHARDSON OVER/UNDER SCALE, 20# CAP.
79		COUNTING SCALE, M/N 2
80		OHAUS TRIPLE BEAM SCALE, M/N CG311, 311 GM. CAP.
81		10" ELEC. ROTARY TUMBLER, 115V, 1 PH.
82		FEDERAL HARDNESS TESTER, W/ GAGE
83		LASSY HAND TAPER, M/N 12
84		PATTON 30" PED. FAN, 115V, 1 PH.
85		TPI INDUSTRIAL 30" PED. FAN, 115V, 1 PH.
86		DAYTON 30" PED. FAN, 115V, 1 PH.
87		DAYTON 24" PED. FAN, 115V, 1 PH.
88		30" PED. FAN, 115V, 1 PH.
89		DAYTON 30" PED. FAN, 115V, 1 PH.
90		DAYTON 18" PED. FAN
91		DIEHL 24" PED. FAN, 115V, 1 PH.
92	8	ASS'T. ARBORS
93	LOT	ASS'T. ABRASIVES
94		2D MET. STORAGE CAB.
95	LOT	ASS'T. FILES
96	LOT	ASS'T. HANDLES, WRENCHES, HOLD DOWNS, ETC.
97		LIFT-RITE PORT. HYD. PALLET JACK, 10,000# CAP.
98		BISHAMON PORT. HYD. PALLET JACK, 5,500# CAP.
99		PORT. HYD. SKID JACK
100		PORT. HYD. SKID JACK
101		5' X 6' PORT. STEEL GANTRY CRANE, W/ CYCLONE CHAIN HOIST, 1/2-TON CAP.
102		GENIE PORT. DIE TRUCK, M/N GL-10, S/N 1397-5936, 350# CAP.
103		WESCO PORT. DIE TRUCK, 750# CAP.
104		8' PORT. STOCK LADDER
105		4' PORT. STOCK LADDER
106		3' PORT. STOCK LADDER
107		3' PORT. STOCK LADDER
108		3' PORT. STOCK LADDER
109		3' PORT. STOCK LADDER
110		3' PORT. STOCK LADDER
111		3' PORT. STOCK LADDER
112		3' PORT. STOCK LADDER
113		GEERPRES PORT. TOOL CART
114		2-WHEEL BARREL TRUCK
115		DAYTON PORT. HYD. FLOOR JACK, 3-TON CAP.
116		DELTA PORT. STRAPPING MACH., W/ ACCESS.
117		STANLEY PORT, STRAPPING MACH., W/ ACCESS.
118		FAIRBANKS PORT. PLATFORM SCALE, 100# CAP.
119		FAIRBANKS PORT. PLATFORM SCALE, 50# CAP.
120		CUT & WELD OUTFIT, W/ CARRIER
121		4" SWIVEL SHOP VISE
122		4" SWIVEL SHOP VISE
123		4" SWIVEL SHOP VISE
123A		25' WOOD WORKBENCH, W/ MET. LEGS
124		SWIVEL & EXTEND BENCH LAMP
125		SWIVEL & EXTEND BENCH LAMP
126		SWIVEL & EXTEND BENCH LAMP
127		SWIVEL & EXTEND BENCH LAMP
128		DUSTKOP DUST COLLECTOR, M/N 520, S/N 16221
129		DAYTON 12" DISC SANDER, 3/4 H.P., 1 PH.
130		ROCKWELL 6" BELT SANDER, 115V, 1 PH., W/ DUST COLLECTOR
131		6" BELT SANDER, 115V, 1 PH., W/ DUST COLLECTOR
132		HI-SPEED GRINDER, 1/2 H.P., 1 PH., W/ PORT. MET. STAND
133		STRAND HI-SPEED GRINDER, 1/4 H.P., 1 PH., W/ PORT. MET. STAND
134		STRAND HI-SPEED GRINDER, 1/4 H.P., 1 PH., W/ PORT. MET. STAND
135		STRAND HI-SPEED GRINDER, 1/4 H.P., 1 PH., W/ PORT. MET. STAND
136		STRAND HI-SPEED GRINDER, 1/4 H.P., 1 PH., W/ PORT. MET. STAND
137		PORT. HYD. PUMP
138		PORT. HYD. PUMP
139		PORT. HYD. PUMP
140		PORT. HYD. PUMP
141		FINISH & ROUGH CAP MACH., 115V, 1 PH. (1971)
142		ALLEN 4-SPINDLE GANG DRILL, W/ 48" X 20" TABLE & INDV. HEADS, 1/2 H.P., 220V, 3 PH.
143		ALLEN 6-SPINDLE GANG DRILL, W/ 66" X 21" TABLE & INDV. HEADS, 1/2 H.P., 220V, 3 PH.
144		CINCINNATI HORIZ. MILLING MACH., M/N 0-8, W/ 7" X 28" TABLE, 440V, 3 PH.
145		CINCINNATI HORIZ. MILLING MACH., M/N 0-8, S/N 2209363, W/ 7" X 28" TABLE, 440V, 3 PH.
146		CINCINNATI HORIZ. MILLING MACH., M/N 0-8, S/N 2301740010, W/ 7" X 28" TABLE, 440V, 3 PH.
147		CINCINNATI HORIZ. MILLING MACH., M/N 0-8, S/N 231740009, W/ 7" X 28" TABLE, 440V, 3 PH.
148		B&S CHOPPER, M/N 0, W/ VARI DRIVE HEAD, 220V, 3 PH.
149		BURKE CINCINNATI HAND MILL, S/N 12117, 3/4 H.P., 3 PH.
150		BURKE HAND MILLER, 1/3 H.P., 3 PH.
151		CINCINNATI HORIZ. MILLING MACH., M/N 0-12, W/ 7" X 28" TABLE, 440V, 3 PH.
152		CINCINNATI HORIZ. MILING MACH., M/N 08, W/ 7" X 28" TABLE, 440V, 3 PH.
153	LOT	ASS'T. HOLD DOWNS, SPACERS, ETC.
154		3" SWIVEL SHOP VISE, W/ 36' WOOD WORKBENCH
155		MAG. LIGHT, W/ SWIVEL & EXTEND ARM, BENCH TYPE
156		32" X 30" X 32" MET. COOLANT CONTAINER
157	LOT	ASS'T. OFFICE EQUIP., DESK, FILE, CLOCK, ETC.
158		HAAS VF-1 CNC VERT. MACH. CENTER, S/N 3362, W/ 3-AXIS, 20 POSITION AUTO. TOOL CHANGER, 14" X 26" TABLE, HAAS CNC CONTROL & TSUDAKOMA PALLET CHANGER (1994)
158A	LOT	ASS'T. ARBOR TOOL HOLDERS
159		ALLEN 4-SPINDLE GANG DRILL, W/ 46" X 21" TABLE, INDV. HEADS, 220V, 3 PH.
160		4-SPINDLE GANG DRILL, W/ 56" X 16" TABLE, 440V, 3 PH.
161		4" SWIVEL SHOP VISE, W/ 5' WOOD BENCH
162	LOT	ASS'T. MISC. TOOLING, W/ MET. SHELVING
163	2	2D WOOD STORAGE CAB., W/ V-BLOCKS, FIXTURES, ETC.
164		LOVEJOY HORIZ. FRUM SANDER, 1/2 H.P., 3 PH.
165		36" DIA. PARTS CLEANER, 220V, 3 PH.
166	18	ASS'T. MET. PARTS BASKETS
167	8	ASS'T. ARBORS, W/ WOOD RACK
168	11	ASS'T. ARBORS
169	9	ASS'T. ARBORS
170	5	ASS'T. ARBORS
171		4" SWIVEL SHOP VISE, W/ BENCH & LAMP
172	6	ASS'T. ARBORS, W/ WOOD RACK
172A		LITTON ROTARY DRESSER, M/N 1B, S/N 05172
173		5' WOOD WORKBENCH, W/ OVERSHELF
174		2D MET. STORAGE CAB.
175		2D MET. STORAGE CAB., W/ WD-40, TASK WIPES, GLOVES, FAN, ETC.
176		TREE UNIVERSAL MILLING MACH., M/N H, S/N 52-5334, W/ 9" X 40" TABLE, 1 1/2 H.P., 3 PH.
177		ABENE HORIZ. MILLING MACH., M/N VHF-28, S/N 1714, 10" X 42" TABLE, 440V, 3 PH.
178		B&S HORIZ. MILLING MACH., M/N PLAIN-12, W/ 7" X 32" TABLE , 1 H.P., 3 PH.
179		B&S HORIZ. MILLING MACH., M/N PLAIN-12, S/N 502-12-224, W/ 10" X 52" TABLE, 7 1/2 H.P. SPINDLE DRIVE, 3 PH.
180		B&S HORIZ. MILLING MACH., M/N PLAIN-12, W/ 10" X 52" TABLE, 3 H.P. SPINDLE DRIVE, 3 PH.
181		B&S HORIZ. MILLING MACH., M/N PLAIN-12, 10" X 52" TABLE, 7 1/2 H.P. SPINDLE DRIVE, 3 PH.
182		B&S HORIZ. MILLING MACH., M/N PLAIN-12, 10" X 52" TABLE, 7 1/2 H.P. SPINDLE DRIVE, 3 PH.
183		B&S HORIZ. MILLING MACH., M/N PLAIN-12, 10" X 52" TABLE, 7 1/2 H.P. SPINDLE DRIVE, 3 PH.
184		CINCINNATI HORIZ. MILLING MACH., M/N O-8, W/ 7" X 26" TABLE, 440V, 3 PH.
185		CINCINNATI HORIZ. MILLING MACH., M/N O-8, W/ 7" X 26" TABLE, 440V, 3 PH.
186		CINCINNATI HORIZ. MILLING MACH., M/N O-8, W/ 7" X 26" TABLE, 440V, 3 PH.
187		CINCINNATI HORIZ. MILLING MACH., M/N O-8, W/ 7" X 26" TABLE, 440V, 3 PH.
188		BRIDGEPORT VERT. KNEE MILL, J-HEAD, S/N J536, W/ 6" X 22" TABLE, 1 H.P., 3 PH.
189	LOT	ASS'T. SPIRAL TOOLING
190		STANLEY 6" D.E. BENCH GRINDER, 1/3 H.P., 1 PH.
191		ROCKWELL 6" BELT SANDER, 115V, 1 PH.
192		DUSTKOP DUST COLLECTOR, 1/4 H.P., 1 PH.
193	8	ASS'T. ARBORS, W/ WOOD RACK
194	3	SECT.'S 3' X 5' X 2' MET. SHELVING
195		B&S HAND HELD SURFACE GRINDER, M/N 5, 440V, 3 PH.
196		KODAK 14" OPTICAL COMPARATOR, M/N 1
197		GRANT AUTOMATIC RIVETER, S/N 203A, 1 H.P., 3 PH.
198		STANDARD MECH. PUNCH PRESS, S/N 23, W/ ALLEN BRADLEY THUMB CONTROLS, 1/2 H.P., 1 PH.
199		4" SHOP VISE, W/ 12' WOOD WORKBENCH
200		2D WOOD STORAGE CAB., W/ CONTENTS
201		2D WOOD STORAGE CAB., W/ MISC. PARTS
202	LOT	ASS'T. GRINDING WHEELS, W/ MET. SHELVING
NEXT AREA
203		EXCELLO TWIN SPINDLE BORING MACH., M/N 712, S/N 712005, 440V, 3 PH., W/ DYNAPURE MIST COLLECTOR
204		HEALD SIZEMATIC I.D. GRINDER, M/N 171, S/N 39952, 5 H.P., 3 PH.
205		HEALD SIZEMATIC I.D. GRINDER, M/N 171, S/N 42947, 5 H.P., 3 PH.
206		CINCINNATI MILACRON HEALD SIZEMATIC I.D. GRINDER, M/N MI, S/N 48391, 5 H.P., 3 PH.
207		PRATT & WHITNEY AIR-O-MATIC TESTER
208	LOT	ASS'T. GRINDER TOOLS, NUTS, BOLTS, ETC., W/ 2D WOOD STORAGE CAB.
209	LOT	ASS'T. WORKBENCHES, BENCH LAMP & CLOCK
NEXT AREA
210		SIGURNEY DRILL PRESS, 1/4 H.P., 1 PH.
211		4" SHOP VISE
212		4" SWIVEL SHOP VISE
213		5" SWIVEL SHOP VISE
214		5" SWIVEL SHOP VISE
215		MAG. LIGHT, BENCH TYPE
216		36" DIA. PARTS CLEANER
217	19	ASS'T. MET. PARTS BASKETS
218		B&S 8 X 24 SURFACE GRINDER, M/N 5, W/ ELECTROMAGNET CONTROL, 440V, 3 PH.
219		B&S 8 X 24 SURFACE GRINDER, M/N 5, S/N 89, W/ ELECTROMAGNET CONTROL, 440V, 3 PH.
220		B&S 6 X 10 SURFACE GRINDER, M/N 510, S/N 523-510-848, 440V, 3 PH.
221		B&S 6 X 18 SURFACE GRINDER, M/N 2, S/N 19056, W/ ELECTROMAGNET CONTROL, 440V, 3 PH.
222		30" DIA. MET. COOLANT TANK
223		DAYTON 6" D.E. PED. GRINDER, 1/2 H.P., 1 PH., W/ DUST COLLECTOR
224		B&S 8 X 24 SURFACE GRINDER, M/N 824 MICROMASTER, S/N 523-824-318, 440V, 3 PH.
225		B&S 8 X 24 SURFACE GRINDER, M/N 824 MICROMASTER, S/N 523-824-828, 440V, 3 PH.
226		B&S 8 X 24 SURFACE GRINDER, M/N 824 MICROMASTER, S/N 523-824-202, 440V, 3 PH.
227		B&S 8 X 24 SURFACE GRINDER, M/N 824 MICROMASTER, S/N 523-824-203, 440V, 3 PH.
228		B&S 6 X 18 SURFACE GRINDER, M/N 618 MICROMASTER, S/N 523-6181-1469, 440V, 3 PH.
229		B&S 6 X 18 SURFACE GRINDER, M/N 618 MICROMASTER, S/N 523-6181-1468
230		ROCKWELL 15" DRILL PRESS, BENCH TYPE, 115V, 1 PH.
231		HELI-COIL FLEX ARM PNEU. HI-SPEED DRILL
232	LOT	ASS'T. MET. FILE & STORAGE CAB.'S
233		ALLEN 6-SPINDLE GANG DRILL, 14" X 66" TABLE, W/ INDIVIDUAL HEADS, 220V, 3 PH.
234		ALLEN 4-SPINDLE GANG DRILL, 21" X 46" TABLE, W/ INDIVIDUAL HEADS, 220V, 3 PH.
235		HAAS VF-1 CNC VERT. MACHINING CENTER, S/N 8357, W/ 3-AXIS, 20 POSITION ALTO TOOL CHANGER, 14" X 26" TABLE, HAAS CNC CONTROL, W/ SMW 100S PALLET CHANGER, (NEW 1996)
236	LOT	ASS'T. TOOL HOLDERS
237		XLO TWIN SPINDLE BORING MACH., M/N 712, S/N 7120010, 1 1/2 H.P., 3 PH., W/ MIST COLLECTOR
238		MICROCLEAR HI-PRESSURE COOLANT & FILTER SYSTEM, M/N ECV3, S/N KW9-012, 10 H.P., 3 PH.
239		LANDIS 10 X 24 CYLINDER GRINDER, M/N 777-15, 440V, 3 PH.
240		TAIL STOCK FOR LANDIS
241		HARDINGE 2ND OPERATION LATHE, M/N VBS-R, TURRET TAIL STOCK, 1 1/2 H.P., 3 PH.
242		ALLEN 4-SPINDLE GANG DRILL, 21" X 46" TABLE, W/ INDIVIDUAL HEADS, 220V, 3 PH.
243		CUSTOM SINGLE SPINDLE BORING DRILL, 1/2 H.P., 3 PH.
244		CINCINNATI HORIZ. MILLING MACH., M/N 08, 7" X 28" TABLE, 440V, 3 PH.
245		CINCINNATI HORIZ. MILLING MACH., M/N 08, 7" X 28" TABLE, 440V, 3 PH.
246		B&S HORIZ. MILLING MACHINE, M/N PLAIN-12, S/N 3184, W/ 7" X 32" TABLE, 5 H.P., 3 PH.
247		B&S HORIZ. MILLING MACHINE, M/N PLAIN-12, S/N 3786, W/ 7" X 32" TABLE, 5 H.P., 3 PH.
248		LEBLOND ENGINE LATHE, S/N A1015, W/ BORING ATTACH., 440V, 3 PH.
249		CUSTOM STUD LAPPER, 1/2 H.P., 3 PH.
250	LOT	ASS'T. MISC. ARBORS, MET. STOCK, ETC.
251	LOT	ASS'T. HOLD DOWNS, SET SCREWS, SPACERS, LAMPS, ETC.
252	LOT	JOB LOT
253	LOT	ASS'T. MET. SHELVING
254	4	SECT.'S ASS'T. 4D, 9D & 13D MET. LOCKERS
NEXT AREA
255	LOT	ASS'T. GAGE HANDLES, THREAD RING, PLUG GAGES, ETC., W/ MET. SHELVING
256	LOT	ASS'T. CUTTERS & TOOL HOLDERS, ETC., W/ 1D MET. CAB.
257	LOT	ASS'T. DIES, CUTTERS, REAMERS, ETC., W/ 1D MET. CAB.
258	LOT	1D MET. CAB., W/ CONTENTS
259	LOT	ASS'T. DRILL BITS & TOOL HOLDERS, ETC., W/ 1D MET. CAB.
260	LOT	ASS'T. MET. FIXTURES
261	LOT	ASS'T. MET. FILE CAB.'S
262		STANLEY 6" D.E. BENCH GRINDER, 1/4 H.P., 1 PH., W/ ASS'T. ABRASIVES & MET. STAND
263	LOT	ASS'T. GAGES, TOOL HOLDERS, ETC., W/ 2D MET. STORAGE CAB.
264		COMPUMILL CNC VERT. MILLING MACHINE, M/N 2500, S/N 80644T, 12" X 24" TABLE, DELTA CNC CONTROL
264A	LOT	ASS'T. TOOLING
265		MILWAUKEE HORIZ. MILLING MACH., M/N H, S/N 51-5254, 10" X 40" TABLE, 440V, 3 PH.
266		MILWAUKEE HORIZ. MILLING MACH., M/N H, S/N 21-5581, 10" X 40" TABLE, 440V, 3 PH.
267	LOT	ASS'T. MILLING MACH. PARTS
268	LOT	ASS'T. CUTTERS
269	LOT	ASS'T. ARBORS, CENTERS, WRENCHES, ETC., W/ 2D WOOD CAB.
270	LOT	ASS'T. REAMERS, CUTTERS, ARBORS, ETC., W/ 2D WOOD CAB.
271		CHEVALIER VERT. MILLING MACH., M/N FM3VS, S/N BM847978, 9" X 42" TABLE, POWER FEED, ACU-RITE D.R.O., 3 H.P., 3 PH.
272		BRIDGEPORT VERT. MILLING MACH., S/N 146076, 9" X 36" TABLE, POWER FEED, NEWALL D.R.O., 1 1/2 H.P., 3 PH.
273		BRIDEPORT VERT. MILLING MACH., S/N 142452, 9" X 36" TABLE, NEWALL D.R.O., 1 1/2 H.P., 3 PH.
274		DOALL 16" VERT. BANDSAW, MOD. METAL MASTER, S/N 424170, W/ GRIND & WELD ATTACH., 220V, 3 PH.
275		DOALL 2D MET. SUPPLY CAB., W/ ASS'T. BANDSAW BLADES
276		MOORE JIG GRINDER, M/N 2, S/N 7534, 8" X 20" TABLE, W/ PATHFINDER D.R.O., 440V, 3 PH.
277		MOORE TOOLS HI-SPEED JIG GRINDING HEAD
278		PNEU. HI-SPEED JIG GRINDING HEADS
279		PNEU. HI-SPEED JIG GRINDING HEADS
280	LOT	ASS'T. MICROSCOPE, JIG GRINDING HEADS, W/ WOOD CAB.
281		DECKER JIG GRINDER, M/N LK, S/N 2600-0405, 12" X 24" TABLE, VARI-SPEED, W/ PATHFINDER D.R.O., 440V, 3 PH.
282		HI-SPEED JIG GRINDING HEAD
283		HI-SPEED JIG GRINDING HEAD
284		JONES & LAMSON OPTICAL COMPARATOR, M/N FC-14 W/ REFLECTION ATTACH.
285		B&S 8 X 24 SURFACE GRINDER, M/N 824 MICROMASTER, S/N 523-824-829, 5 H.P., 3 PH.
286		NORTON 6 X 18 SURFACE GRINDER, W/ ELECTROMAGNET CONTROL, 1 1/2 H.P., 3 PH.
287		PRATT & WHITNEY SHOP LATHE
288		SUNNEN PRECISION HONING MACH., M/N MA, S/N 6590, 820 R.P.M. SPINDLE SPEED, 1/3 H.P., 1 PH.
289		BALDOR 6" D.E. CARBIDE GRINDER, 1/2 H.P., 3 PH.
290		DAYTON 1" BELT SANDER, 1/3 H.P., 1 PH.
291		TWIN STANLEY H.D. 6" D.E. BENCH GRINDERS, 1/2 H.P., 1 PH., W/ TORIT DUST COLLECTOR, M/N 64
292	LOT	ASS'T. GRINDING WHEELS, CABINETS, BENCHES, ETC.
293		OKAMOTO 6 X 12 SURFACE GRINDER, M/N LINER 6.12/14, S/N 2919U, W/ ELECTROMAGNET CONTROL, 2 H.P., 3 PH.
294		B&S 6 X 12 SURFACE GRINDER, M/N 612, S/N 523-612-307, 1 1/2 H.P., 1 PH.
294A		TORIT DUST COLLECTOR, M/N 64, S/N 80615, 220V, 3 PH.
295		B&S UNIVERSAL GRINDER, M/N 13, S/N 525-13-1715, 1 H.P., 3 PH.
296		SUNNEN HONING MACH., M/N MBB-1600, S/N 42693, 1 H.P., 3 PH.
297	LOT	ASS'T. MISC. PARTS, MANDRELS, GRINDING WHEELS, CUTTERS, CENTERS, ETC., W/ 2D MET. CAB.
298		3 1/2" SURFACE PLATE DIAMOND ROLL
299		3 1/2" SURFACE PLATE DIAMOND ROLL
300	LOT	ASS'T. SUNNEN HONING PARTS, STONES, MANDRELS, SLEEVES, ETC., W/ 2D MET. CAB.
301	LOT	ASS'T. DRILL BLANKS, GRINDING WHEELS, LIVE CENTERS, ETC., W/ 2D MET. CAB.
302	LOT	ASS'T. BORING BARS, LIVE CENTERS, DRILL BITS, CUTTERS, ETC., W/ 2D WOOD CAB.
303	LOT	ASS'T. CARBIDE PIN GAGES, W/ MET. FILE CAB.
304	LOT	ASS'T. REPAIR PARTS, W/ 2D MET. CAB.
305	LOT	ASS'T. DOWEL PINS, CLAMPS, SPRING PINS, ETC., W/ 2D WOOD CAB.
306	LOT	ASS'T. DRILLS, COUNTERSINKS, ETC., W/ 1D MET. CAB.
307	LOT	ASS'T. DRILLS, REAMERS, CUTTERS, ETC., W/ 1D MET. CAB.
308	LOT	ASS'T. TOOL HOLDERS, LIVE CENTERS, TAPS, ETC., W/ 1D MET. CAB.
309		1D MET. STORAGE CAB.
310	LOT	ASS'T. INDICATORS, CLAMPS, CLIPPER PARTS, ETC., W/ 1D MET. CAB.
310A	LOT	ASS'T. PIN GAGES, FIXTURE PARTS, SET SCREWS, TOOL HOLDERS, ETC.
311	2	4" SWIVEL SHOP VISES, W/ WOOD WORKBENCH
312		MAG. LIGHT, W/ FLEX ARM
313		BENCH LAMP, W/ ADJ. ARM
314		BENCH LAMP, W/ ADJ. ARM
315		BENCH LAMP, W/ ADJ. ARM
316		BENCH LAMP, W/ ADJ. ARM
317		BENCH LAMP, W/ ADJ. ARM
318		BENCH LAMP, W/ ADJ. ARM
319		BENCH LAMP, W/ ADJ. ARM
319A		BENCH LAMP, W/ ADJ. ARM
320		4" SWIVEL SHOP VISE
321		4" SWIVEL SHOP VISE
322		4" SWIVEL SHOP VISE
323		4" SWIVEL SHOP VISE
324		4" SWIVEL SHOP VISE
324A		4" SWIVEL SHOP VISE
325	LOT	ASS'T. DOWEL PINS, SET SCREWS, SPRING PINS, NUTS, WASHERS, W/ (4) ASS'T. PARTS CAB.'S
326	LOT	ASS'T. CARBIDE BUSHINGS, W/ 4D MET. CAB.
327	LOT	ASS'T. ALLEN SCREWS, PLUG GAGES, BUSHINGS, ETC., W/ (5) ASS'T. PARTS CAB.'S
328	LOT	ASS'T. PLUG GAGES, REPLACEMENT PLUGS, ETC., W/ (3) 2D MET. PARTS CAB.'S
329	LOT	ASS'T. PLUG GAGES, REPLACEMENT PLUGS, ETC., W/ (3) 2D MET. PARTS CAB.'S
330	LOT	ASS'T. PLUG GAGES, W/ (2) 2D MET. PARTS CAB.'S
331	LOT	ASS'T. DRILL BUSHINGS, SETTING PLUGS, THREAD PLUGS, ETC., W/ 15D MET. PARTS CAB.
332	LOT	ASS'T. DIAL GAGES, INDICATOR BASES, ETC., W/ 2D MET. CAB.
333	5	ASS'T. MET. FILE & PARTS CAB.'S
334	2	G.E. WALL CLOCKS
335		LEBLOND ENGINE LATHE, MOD. REGAL, S/N 8C-3641, 18" X 30", VARI-SPEED, CROSS SLIDE & TAIL STOCK, 440V, 3 PH.
336	LOT	ASS'T. TOOL HOLDERS, CHUCKS, ETC., W/ 2D WOOD CAB.
337		HARDINGE SHOP LATHE, S/N TLP-59-14577, 12" X 16", CROSS SLIDE & TAIL STOCK, 440V, 3 PH.
338		TAYLOR FENN TWIN SPINDLE GANG DRILL, 16" X 32" TABLE, 3/4 H.P., 3 PH., INDIVIDUAL HEADS
339		PRATT & WHITNEY ENGINE LATHE, MOD. C, 14" X 30" CROSS SLIDE, TAIL STOCK, SPARE CHUCKS, 440V, 3 PH.
340	LOT	ASS'T. REAMERS, DRILL BITS, END MILLS, CUTTERS, ETC.
341		B&S HORIZ. MILLING MACH., 7" X 32" TABLE, 5 H.P., 3 PH.
342		B&S HORIZ. MILLING MACH., 7" X 32" TABLE, 5 H.P., 3 PH.
343		B&S HORIZ. MILLING MACH., 7" X 32" TABLE, 5 H.P., 3 PH.
344		HEALD I.D. GRINDER, M/N 171
CUSTODIAN ROOM
345		AMERICAN LINCOLN ELEC. FLOOR SWEEPER, M/N 91WS, 245 HR., W/ CHARGER
346		DAYTON PORT. FLOOR BUFFER, 115V, 1 PH.
347	LOT	ASS'T. BROOMS, MOPS, BUCKET, ETC.
NEXT ROOM
348	5	SECT.'S 3' X 8' X 1' MET. SHELVING
349	LOT	ASS'T. PAPER GOODS, W/ (4) 2D MET. STORAGE CAB.'S
350		CINCINNATI HORIZ. MILLING MACH., M/N 0-8, 7" X 18" TABLE, 440V, 3 PH.
351		CINCINNATI HORIZ. MILLING MACH., M/N 0-8, 7" X 18" TABLE, 440V, 3 PH.
352		CINCINNATI HORIZ. MILLING MACH., M/N 0-8, 7" X 18" TABLE, 440V, 3 PH.
353		CINCINNATI CUTTER & TOOL GRINDER, M/N 2, S/N 1D2T1D-280, 3/4 H.P., 3 PH.
354		ALLEN 4-SPINDLE GANG DRILL, 21" X 46" TABLE, 1/2 H.P., 3 PH., INDIVIDUAL HEADS
355		B&S CYLINDER GRINDER, M/N 5, 3 H.P., 3 PH.
356		CINCINNATI CUTTER & TOOL GRINDER, M/N 2, S/N 1D2T1S-274, 3/4 H.P., 3 PH.
357		CINCINNATI CUTTER & TOOL GRINDER, M/N 2, S/N 1D2T1S-114, 3/4 H.P., 3 PH.
358		B&S CUTTER & TOOL GRINDER, M/N 10N, S/N 525-10-465, 3/4 H.P., 3 PH.
359		TORIT DUST COLLECTOR, M/N VS1200, S/N 259100, 3 H.P., 3 PH.
360		PROSSER 6" D.E. PEDESTAL CARBIDE GRINDER, 1/3 H.P., 1 PH.
361		DIP SEAL PLASTICS MELTING POT, 400 DEGREE MAX., 115V, 3 PH.
362	LOT	ASS'T. TOOLING, W/ 2D WOOD CAB.
363	LOT	ASS'T. GRINDING ATTACHMENTS
364		CUSTOM GRINDING ATTACHMENT
365	LOT	ASS'T. GRINDING WHEELS, W/ WORKBENCH
366	LOT	ASS'T. CUTTERS, END MILLS, REAMERS, ETC. W/ WOOD CAB.
MAINTENANCE SHOP
367		BRIDGEPORT VERT. MILLING MACH., S/N 46242, 9" X 36" TABLE & ACU-RITE D.R.O., 1 H.P., 3 PH.
368	LOT	ASS'T. DRILL BITS, END MILLS, TAPER PINS, REAMERS, O-RINGS, ETC., W/ MET. PARTS CAB.
369		MONARCH ENGINE LATHE, M/N 10EE, S/N 15942, 12 1/2" X 20", CROSS SLIDE & TAIL STOCK, 440V, 3 PH.
370	LOT	ASS'T. COLLETS, CHUCKS, JACOBS CHUCKS, ETC., W/ 24" MET. STAND
371		TORIT SWING ARM FUME EXHAUSTER, W/ EXHAUST MOTOR
372		NORTON 6 X 18 SURFACE GRINDER, M/N S-3, S/N 159533-3, 3/4 H.P., 3 PH.
373		WALKER TURNER 10" TABLE SAW, 220V, 3 PH.
374		BALDOR 8" D.E. BENCH GRINDER, 3/4 H.P., 3 PH., W/ TORIT DUST COLLECTOR
375		ELECTRO-MECHANO 20" DRILL PRESS, FLOOR TYPE, M/N 801, S/N 69491, 220V, 3 PH.
376		SAFE CABINET 2D SAFE
376A	LOT	ASS'T. RECEPTACLES, GROUND WIRE, COPPER TUBING, ETC.
377		4" SWIVEL SHOP VISE
378		4" SWIVEL SHOP VISE
379		4" SWIVEL SHOP VISE
380		MAG. LIGHT, W/ FLEX ARM
381		MAG. LIGHT, W/ FLEX ARM
382	LOT	ASS'T. BRASS FITTINGS, WIRE BRAIDS, RELAYS, ETC., W/ MET. SHELVING
383	LOT	ASS'T. SHAFT KEYS, OIL PLUGS, RIVETS, STAPLES, PULL STATIONS, ETC., W/ WOOD CAB.
384	LOT	ASS'T. PEG BOARD HARDWARE
385	LOT	ASS'T. NUTS, TEFLON TAPE, HEX HEAD CLAMPS, FASTENERS, ETC., W/ 2D WOOD CAB.
386	LOT	ASS'T. LAMP HOLDERS, SET SCREWS, WASHERS, KNOCKOUTS, ETC.
387	LOT	ASS'T. SPLITTING CLAMPS, CONNECTORS, SAFETY SPRINGS, ETC.
388	LOT	ASS'T. SWIVEL HANGERS, BOLTS, TOGGLE BOLTS, ETC.
389	LOT	ASS'T. BOLTS, FUSE LINKS, CARRIAGE BOLTS, ETC.
390	4	SECT.'S 3' X 4' X 1' MET. PARTS CAB.'S & SHELVING
391	LOT	ASS'T. GRINDING SHIELDS, VALVES, MOTORS, ETC., W/ WOOD CAB.
392	LOT	ASS'T. COPPER FASTENERS, PIPE FITTINGS, PINS, CUPS, ETC., W/ MET. PARTS CAB.
393	LOT	ASS'T. ELBOWS, BRASS FITTINGS, CONNECTORS, BEARINGS, ETC., W/ MET. PARTS SHELVING
394	LOT	ASS'T. PULLEYS
395	303	ASS'T. V-BELTS
396	LOT	ASS'T. HAND TOOLS, W/ FLIP TOP CAB.
397	LOT	ASS'T. STAPLERS, TROWELS, HYD. JACK, DROP LIGHT, ETC., W/ 2D MET. CAB.
398		BACHARACH COMBUSTION TEST KIT
399		BEARING PULLER SET, W/ CASE
400		HKK CHAIN ASS'T. PARTS KIT, W/ CASE
401	LOT	ASS'T. THUMB SCREWS, CLAMPS, ETC., W/ MET. PARTS CAB.
402	LOT	ASS'T. PRESSURE GAGES, W/ TOOL BOX
403	LOT	ASS'T. HAND TOOLS, W/ TOOL BOX
404		WHEEL PULLER SET, W/ TOOLBOX
405	LOT	ASS'T. WIRE CONNECTORS, SET SCREWS, ETC.
406	LOT	ASS'T. O-RINGS, SPRINGS, ETC.
407	LOT	ASS'T. BLOWER PARTS, GROMMET STRIPS, PAPER TOWEL DISPENSERS, ETC.
408	LOT	ASS'T. MISC. PARTS, W/ 2D WOOD CAB.
409		CUSTOM PORT. TABLE DOLLY
410	LOT	JOB LOT
411		L-SHAPE WOOD WORKBENCH
412		L-SHAPE WOOD WORKBENCH
413		LYON 5D MET. PARTS CAB.
414	LOT	ASS'T. ELECTRILCAL WIRE, W/ 2D MET. STORAGE CAB.
415	LOT	ASS'T. SCREWDRIVERS, WRENCHES, CAULKING GUN, ETC., W/ 2D MET. STORAGE CAB.
416	LOT	ASS'T. SAFETY SHIELDS, HOSES, METERS, ETC., W/ 2D MET. STORAGE CAB.
417	LOT	ASS'T. COPPER FITTINGS, W/ 2D MET. STORAGE CAB.
418	LOT	ASS'T. SILICONE, RESPIRATORS, RAIN SUITS, CLEANERS, ETC., W/ 2D MET. STORAGE CAB.
419	LOT	ASS'T. FAN BLADES, WIRE, TUBING, BOLTS, ETC., W/ MET. SHELVING
420	LOT	ASS'T. SPRINGS, GASKET SEALER, BRUSHES, COPPER CLAMPS, ETC., W/ 2D MET. STORAGE CAB.
421	LOT	ASS'T. PAPER CUPS, CLEANERS, STAIR CAULKING, TOWELS, ETC., W/ 2D MET. STORAGE CAB.
422		MET. KEY CABINET
423	LOT	ASS'T. FUSE LINKS, HEATER COILS, SWITCHES, ETC., W/ 3 ASS'T. MET. PARTS CAB.'S
424		2D FLAME PROOF CAB.
425	LOT	ASS'T. SOAP, STEEL WOOL, BULBS, PLASTIC BOWLS, ETC., W/ 2 ASS'T. MET. PARTS CAB.'S
426	LOT	ASS'T. MOTORS, FILTERS, REDUCERS, BRASS THREAD VALVES, ETC., W/ 4D MET. CAB. & OVERSHELF
427	LOT	ASS'T. CONTROLS, MOTORS, NUTS, SCREWS, ETC.
428	LOT	ASS'T. BRUSHES, NYKLON NUTS, SWITCHES, ETC.
428A	2	SECT.'S MET. SHELVING
429		SPILL CONTROL STATION, W/ ASS'T. BLANKETS
430		4D MET. FILE CAB.
431		4D MET. FILE CAB.
432		4D MET. FILE CAB.
433		4D MET. FILE CAB.
434		4D MET. FILE CAB.
435		4D MET. FILE CAB.
436	3	ASS'T. MET. FILE CAB.'S
437	LOT	ASS'T. PRESSURE CONTROLS, TIME RELAYS, MODULES, ETC.
438	LOT	ASS'T. H.D. EXT. CORDS, W/ 1D MET. LOCKER
439		60" D.P. WOOD DESK
440	LOT	ASS'T. SCREWS, HOLE SAWS, CLAMPS, WASHERS, CAULKING, ETC., W/ 1D MET. STORAGE CAB.
441	2	ASS'T. SHOP FANS
STEEL AREA
442		DOALL 9" X 16" HORIZ. BANDSAW, M/N C-916A, S/N 90334, W/ 2-TIER 10' X 20" IN FEED CONVEYOR, 2 H.P., 3 PH.
443		10" WET CUT OFF SAW, 5 H.P., 3 PH.
443A		DAYTON 6" D.E. BENCH GRINDER, W/ TORIT DUST COLLECTOR, 1 PH.
444		MARVEL 7" X 12" HORIZ. BANDSAW, M/N 712M, 1/2 H.P., 3 PH.
445		FERRACUTE MECH. PUNCH PRESS, M/N P3, S/N 23760, 40 TON CAP., W/ THUMB CONTROLS
446		BLISS MECH. PUNCH PRESS, 1 1/2 H.P., 3 PH., W/ THUMB CONTROL
447		4" SWIVEL SHOP VISE, W/ WORKBENCH
448	LOT	ASS'T. FLAT ROLL BANDING STOCK
449		MONTGOMERY 18" LAPPING TABLE
450		MONTGOMERY 18" LAPPING TABLE
451		42" H.D. MET. TABLE, W/ UNDER & OVERSHELFS
452		42" H.D. MET. TABLE, W/ UNDER & OVERSHELFS
453	LOT	ASS'T. BASKETS, CHAIN, FIXTURES, ETC.
454	2	SECT.'S 8' X 10' X 42" H.D. STEEL PALLET RACKING
455	2	SECT.'S 8' X 10' X 42" H.D. STEEL PALLET RACKING
456	LOT	ASS'T. GRINDING WHEELS
457	LOT	ASS'T. CAULKING, ADHESIVES, LAPPING COMPOUND, STRING, ETC.
458	LOT	ASS'T. FILTERS
459		36" X 48" MET. SHELVING
460		SECT. 6' MET. SHELVING
461		SECT. 9' MET. SHELVING
462		SECT. 66" WOOD SHELVING
463	LOT	ASS'T. ROUND, FLAT & BAR STEEL STOCK
464	LOT	ASS'T. ROUND, FLAT & BAR STEEL STOCK
465	LOT	ASS'T. ROD BAR STEEL STOCK
466		15' WOOD A-FRAME RACK
467	LOT	ASS'T. ROUND, FLAT & BAR STEEL STOCK
468	LOT	ASS'T. ROUND, FLAT & BAR STEEL STOCK
469	LOT	ASS'T. ROD BAR STEEL STOCK
470		15' WOOD A-FRAME RACK
471	LOT	ASS'T. FLAT STEEL STOCK
472	23	55 GAL. DRUMS, W/ ASS'T. STEEL SCRAP METAL
473	11	55 GAL. DRUMS, W/ ASS'T. STEEL SCRAP METAL
474	18	12' FLAT BAR STEEL STOCK
475	2	20' SQUARE STEEL STOCK
476	LOT	ASS'T. TIMING BELTS, HIGH SPEED HEADS, SCREWS, NUTS & BOLTS, ETC.
477	LOT	ASS'T. PULLEYS, GEARS, SPRINGS, MOTORS, SCREWS, NUTS & BOLTS, ETC.
478	LOT	ASS'T. SET SCREWS, NAILS, ETC.
479		SECT. 15' WOOD PARTS SHELVING
480	LOT	ASS'T. FILES, ABRASIVE PAPER, STEEL SHIM STOCK, ETC.
481	LOT	ASS'T. SET SCREWS, GRINDING WHEELS, MISC. STONES, ROUND TAPER, W/ 192D OAK PARTS CAB.
482	LOT	ASS'T. NAILS, GRINDING WHEELS & PAPER GOODS
483	LOT	ASS'T. NUTS, SCREWS, ETC.
484	3	SECT.'S 3' X 8' X 18" MET. SHELVING
485		SECT. 3' X 7' X 12" MET. SHELVING
486	LOT	ASS'T. ABRASIVE PAPER, GRINDING SHIELDS, FILES, ETC.
487	LOT	ASS'T. ABRASIVE PAPER, MET. BASKETS, ETC.
488	LOT	ASS'T. FLAT STEEL STOCK & STEEL WIRE SPOOLS, W/ PORT. MET. SHELVING
489		2D WOOD STORAGE CAB., W/ CONTENTS
490		2D WOOD STORAGE CAB., W/ CONTENTS
491	LOT	ASS'T. SOLDERING WIRE, FEELER STOCK, TAPE, PELLETS, ETC., W/ 2D MET. STORAGE CAB.
492		1D MET. LOCKER, W/ CONTENTS
492A		3' X 7' X 1' MET. SHELVING
493		15' MET. SHELVING
494		15' MET. SHELVING
495	2	WYSE MONITOR, W/ KEYBOARD
496	LOT	ASS'T. DESKS & MET. FILE CAB.'S
497	LOT	JOB LOT, W/ WORKBENCH
498	LOT	ASS'T. LIGHT BULBS, W/ 2D MET. STORAGE CAB.
499		1D WOOD STORAGE CAB., W/ CONTENTS
500		AMERICAN MONARAIL, 1 TON, 20' SPAN X 150' RUNWAY, SINGLE GIRDER OVERHEAD BRIDGECRANE, W/ COFFING 1 TON CHAIN HOIST & BARREL CLAMP
501		LOUISVILLE 24' FIBERGLASS EXT. LADDER
502		BISHOP 12' WOOD STEPLADDER
503		BISHOP 10' WOOD STEPLADDER
504		BISHOP 10' WOOD STEPLADDER
505		BISHOP 8' WOOD STEPLADDER
506		BISHOP 8' WOOD STEPLADDER
507		BISHOP 8' WOOD STEPLADDER
508		BISHOP 5' WOOD STEPLADDER
509		BISHOP 4' WOOD STEPLADDER
510		BISHOP 4' WOOD STEPLADDER
511		BISHOP 3' WOOD STEPLADDER
512		BARREL PUMPS
513		BARREL PUMPS
514		BARREL PUMPS
515		BARREL PUMPS
516		BARREL PUMPS
517		BARREL PUMPS
518		BARREL PUMPS
519		BARREL PUMPS
520		BARREL PUMPS
521		BARREL PUMPS
522		BARREL PUMPS
523		BARREL PUMPS
524		BARREL PUMPS
525		BARREL PUMPS
526		BARREL PUMPS
527		BARREL PUMPS
528		BARREL PUMPS
529		BARREL PUMPS
530		CHARLES BARREL PUMPS
531		CHARLES BARREL PUMPS
532		CHARLES BARREL PUMPS
533		CHARLES BARREL PUMPS
534		CHARLES BARREL PUMPS
535		CHARLES BARREL PUMPS
536		CHARLES BARREL PUMPS
537		CHARLES BARREL PUMPS
538		CHARLES BARREL PUMPS
539		CHARLES BARREL PUMPS
540		CHARLES BARREL PUMPS
541		CHARLES BARREL PUMPS
542		CHARLES BARREL PUMPS
543		CHARLES BARREL PUMPS
544		8' X 4' PLASTIC SPILL RACKS
545		8' X 4' PLASTIC SPILL RACKS
546		8' X 2' PLASTIC SPILL RACKS
547		8' X 2' PLASTIC SPILL RACKS
548		8' X 2' PLASTIC SPILL RACKS
549		4' X 6' DIAMOND PLATE DOCK PLATE
550		60" X 30" DIAMOND PLATE DOCK PLATE
551	LOT	ASS'T. BLACK PIPE & COPPER TUBING
552	LOT	ASS'T. CONDUIT & BLACK PIPE
553	2	SECT.'S 8' X 10' X 42" H.D. STEEL PALLET RACKING
554	LOT	ASS'T. K.D. CARTONS
555	LOT	ASS'T. OIL
MACHINE SHOP
556		B&S 6 X 18 SURFACE GRINDER, M/N 2, 2 H.P., 3 PH.
556A		DUSTKOP DUST COLLECTOR
557		FELLOWS GEAR SHAPER, TYPE 7, S/N 30936, 5 H.P., 3 PH.
558		RED WING GEAR FINISHER, S/N GC1-734, 5 H.P., 3 PH.
559		OKUMA CNC LATHE, M/N CAPTAIN-L370MW, S/N 08-2001-0230, W/ 12 POSITION TURRET, 20" X 20" MAX LENGTH, PROGRAMMABLE TAIL STOCK & SHIP CONVEYOR, (2001)
560		LNS QUICK LOAD SERVO 52 AUTOMATIC BAR FEEDER, S/N 301136, (2001)
561	LOT	OKUMA TOOLING, W/ MET. CAB.
562		OKUMA CNC VERT. MACHINE CENTER, M/N 3016, S/N 0013, W/ 20 POSITION AUTO TOOL CHANGER, 16" X 24" TABLE, 3 AXIS, #40 TAPER & A/C UNIT
563	LOT	ASS'T. OKUMA TOOLING
564		CUSTOM S.E BUFFER, FOOT OPERATED, 1/3 H.P., 1 PH.
565		WALKER TURNER TWIN SPINDLE GANG DRILL, 36" X 24" TABLE, 1 H.P., 3 PH., INDIVIDUAL HEADS
566		B&S SURFACE GRINDER, M/N 2, 1/2 H.P., 3 PH.
567		4" SWIVEL SHOP VISE, W/ 10' WORKBENCH
568		STANLEY 8" D.E. BENCH GRINDER, 1/2 H.P., 3 PH.
569		WM. SELLERS S.E. DRILL GRINDER, 3 1/2 H.P., 1 PH.
570	LOT	ASS'T. TOOLING, W/ 2D MET. STORAGE CAB.
571	LOT	ASS'T. DRILL BITS, END MILLS, ETC.
572	2	SECT.'S 3' X 7' X 2' MET. SHELVING
573	LOT	ASS'T. CUTTERS, COLLETS, BLOCKS, ETC., W/ MET. PARTS CAB.
574	LOT	ASS'T. THIN B.T. INSERTS, W/ 32D MET. PARTS CAB.
575		4" SWIVEL SHOP VISE, W/ 28' WORKBENCH
576		2D WOOD STORAGE CAB., W/ CONTENTS
577		2D WOOD STORAGE CAB., W/ CONTENTS
578		SUNNEN HONING MACH., M/N MBC-1805, S/N 93374, 1 H.P., 3 PH.
579	LOT	ASS'T. HONE MANDRELS & HONE ACCESS.
580	9	SUNNEN FILTER ELEMENTS
581		HARDINGE 2ND OPERATION LATHE, M/N V5B-R, W/ 6 POSITION TURRET, 440V, 3 PH.
581A		LIPE-ROLLWAY PNEU. BAR FEED, M/N 125, S/N 10608
582		MEGAMATIC GUN DRILL, M/N M8010, S/N 170, W/ COOLANT SYSTEM, 440V, 3 PH.
583		B&S FACE GRINDER, M/N 11, S/N 11-47, 1 1/2 H.P., 3 PH.
584		B&S 2" X 14" CYLINDER GRADER, M/N 5, 3 H.P., 3 PH.
585		B&S HAND SCREW MACHINE, M/N O, S/N 540-0-390, W/ 6 POSITION TURRET, 440V, 3 PH.
586		MYFORD O.D. GRINDER, M/N MG12, S/N HPM170763, W/ COOLANT SYSTEM & PED. CONTROL, 3 H.P., 3 PH., (2000)
586A		I.D. GRINDING ATTACH., S/N WS171089BSK
587		MYFORD O.D. GRINDER, M/N MG12, S/N NM169573, W/ COOLANT SYSTEM, 3 H.P., 3 PH., (1997)
588		CINCINNATI CENTERLESS GRINDER, M/N 2, S/N 2M-2HIR-396, 10 H.P., 3 PH.
589		CINCINNATI CENTERLESS STOP ATTACH.
590	LOT	ASS'T BLADES
591		JOB LOT
592		OVERHEAD CRANE, 1/4 TON, 20' SPAN X 20' RUNWAY, W/ YALE CHAIN HOIST, 1/2 TON CAP.
592A		1/4 TON CRANE, W/ CHAIN HOIST, 1 TON CAP.
593		4" SEIVEL SHOP VISE, W/ 30' WORKBENCH
594	LOT	ASS'T. TOOLING, HAMMERS, FILES, ETC.
595		LANDIS 1" X 24" PLAIN GRINDER, M/N R, S/N 859-70, 15 H.P., 3 PH.
596		ALLEN 4-SPINDLE GANG DRILL, 48" X 21" TABLE, 1/2 H.P., 3 PH., INDIVDUAL HEADS, 220V, 3 PH.
597		ALLEN 4-SPINDLE GANG DRILL, 48" X 21" TABLE, 1/2 H.P., 3 PH., INDIVDUAL HEADS, 220V, 3 PH.
598		ALLEN 4-SPINDLE GANG DRILL, 48" X 21" TABLE, 1/2 H.P., 3 PH., INDIVDUAL HEADS, 220V, 3 PH.
599		B&S 8 X 24 SURFACE GRINDER, M/N 5, 1/2 H.P., 3 PH.
600		CINCINNATI HORIZ. MILLING MACHINE, M/N 0-12, 7" X 28" TABLE, 440V, 3 PH.
601		B&S 8 X 24 SURFACE GRINDER, M/N 824 MICROMASTER, S/N 523-824-319, 5 H.P., 3 PH.
602		36" DIA. PARTS CLEANER, 220V, 3 PH.
602A	14	ASS'T. ARBORS
603	LOT	ASS'T. MISC. TOOLING
603A	LOT	ASS'T. TOOL HOLDERS, CUTTERS, BORING BARS, ETC.
604		B&S #O MILLING MACH., S/N 1246, 3/4 H.P., 3 PH.
605		30" DIA. COOLANT TANK
606		H.E.S. CNC HORIZ. MILLING MACHINE, M/N ZIC, S/N 104240/124, 12" X 48" TABLE, 440V, 3 PH., W/ DYNAPATH SYSTEM-10 CNC CONTROL
607		H.E.S. CNC HORIZ. MILLING MACH., M/N ZIC, 12" X 48" TABLE, 440V, 3 PH., W/ DYNAPATH SYSTEM-10 CNC CONTROL
608		H.E.S. CNC HORIZ. MILLING MACHINE, M/N ZIC, S/N 104180/165, 12" X 48" TABLE, 440V, 3 PH., W/ DELTA-10 CNC CONTROL
609		H.E.S. CNC HORIZ. MILLING MACHINE, M/N ZIC, S/N 104060, 12" X 48" TABLE, 440V, 3 PH., W/ DYNAPATH CNC CONTROL
610		4" SWIVEL SHOP VISE, W/ 4' WORKBENCH
611	LOT	ASS'T. CHUCKS, DRILL BITS, HOLD DOWNS, ETC.
612	LOT	ASS'T. REAMERS, END MILLS, WASHERS, ETC., W/ 64D MET. PARTS CAB.
613		OKUMA CNC HORIZ. MACHINING CENTER, M/N MA-40A, S/N 0495, 120 POSITION ATC, 3 AXIS, 25,000 RPM, MAX SPEED, W/ OKUMA OSP-U100M CONTROL, CHIP CONVEYOR, (NEW 2000)
614		MAHO CNC VERT. MACHINING CENTER, M/N MH600C, S/N 661854, 30 POSITION ATC, W/ MAHO 532 CNC CONTROL, CHIP CONVEYOR & A/C UNIT
615		CUSTOM TWIN PNEU. HI-SPEED GRINDING HEADS
616		HI-SPEED GRINDING HEAD ATTACH.
617		RED WING GEAR HONER, M/N GHD, S/N 348, 3/4 H.P., 3 PH.
618		48" WOOD WORKBENCH
619	LOT	ASS'T. FIXTURES, 4" VISE & 2D MET. CAB.
620		CINCINNATI 6" X 16" CENTERLESS GRINDER, S/N 9M8H5S-69, 10 H.P., 3 PH., W/ COOLANT SYSTEM, 440V, 3 PH.
621	2	ASS'T. GRINDING FIXTURES
622		B&S OVERHEAD DRIVEN HORIZ. MILLING MACHINE, M/N OY, 3/4 H.P., 3 PH.
623		B&S OVERHEAD DRIVEN HORIZ. MILLING MACHINE, M/N OY, 3/4 H.P., 3 PH.
624		B&S OVERHEAD DRIVEN HORIZ. MILLING MACHINE, M/N OY, 3/4 H.P., 3 PH.
625		GARVIN OVERHEAD DRIVEN HORIZ. MILLING MACHINE, W/ V.S. MOTOR & COOLANT SYSTEM, (1948)
626	6	SECT.'S 10' X 14" SOLID ROLLER CONVEYOR
627		SECT. 5' X 14" SOLID ROLLER CONVEYOR
628	6	ADJ. T-STANDS
629	6	ADJ. T-STANDS
630	5	ADJ. T-STANDS
631	5	ADJ. T-STANDS
632	5	ADJ. T-STANDS
632A	LOT	ASS'T. MISC. FIXTURES
633		60" D.P. WOOD DESK, UPH. SWIVEL SEC. CHAIR
634		CUSTOM STAMPING MACH., 1 PH.
635		60" MET. WORKBENCH, W/ FLEX LAMP
636	LOT	ASS'T. TOOLING, W/ 2D WOOD CAB.
637		BURGMASTER TURRET DRILL, M/N 1D, S/N 630I, 6 POSITION TURRET, W/ 40" X 24" TABLE & TAPPING HEAD, 220V, 3 PH.
638		BURGMASTER TURRET DRILL, M/N 1D, S/N 630I, 6 POSITION TURRET, W/ 16" X 12" TABLE & TAPPING HEAD, 220V, 3 PH.
639		SELLERS S.E. TOOL GRINDER, M/N 1G, S/N E6380, 115V, 1 PH.
640	6	ASS'T. CUTTERS
641		WARNER & SWASEY TURRET LATHE, M/N 3, S/N 1123703, 6 POSITION TURRET, 440V, 3 PH.
642	LOT	ASS'T. HAND TOOLS, FILES, BRUSHES, HACK SAW, NUTS, ETC., W/ PORT. A-FRAME CART
643		CINCINNATI I.D. GRINDER, M/N 171, S/N 46426, 5 H.P., 3 PH., W/ COOLANT SYSTEM
644		CINCINNATI HORIZ. MILLING MACHINE, M/N 2-18, S/N 1B-2PIK323, 10" X 36" TABLE, 5 H.P., 3 PH.
645		CINCINNATI HORIZ. MILLING MACHINE, M/N 2-18, S/N 1B-2PIK317, 10" X 36" TABLE, 5 H.P., 3 PH.
646		ALLEN 4-SPINDLE GANG DRILL, 66" X 21" TABLE, 3 H.P., 3 PH., INDIVIDUAL HEADS
647		ALLEN 4-SPINDLE GANG DRILL, 50" X 21" TABLE, 220V, 3 PH., INDIVIDUAL HEADS
648		ALLEN 4-SPINDLE GANG DRILL, 50" X 21" TABLE, 220V, 3 PH., INDIVIDUAL HEADS
649		ALLEN 6-SPINDLE GANG DRILL, 80" X 21" TABLE, 2 H.P., 3 PH., INDIVIDUAL HEADS
650		WISCONSIN MULTI-SPINDLE DRILL HEAD
650A		WISCONSIN MULTI-SPINDLE DRILL HEAD
650B		WISCONSIN MULTI-SPINDLE DRILL HEAD
650C		WISCONSIN MULTI-SPINDLE DRILL HEAD
650D		WISCONSIN MULTI-SPINDLE DRILL HEAD
650E		WISCONSIN MULTI-SPINDLE DRILL HEAD
650F		WISCONSIN MULTI-SPINDLE DRILL HEAD
650G		WISCONSIN MULTI-SPINDLE DRILL HEAD
650H		WISCONSIN MULTI-SPINDLE DRILL HEAD
650I		WISCONSIN MULTI-SPINDLE DRILL HEAD
651		COMMANDER MULTI-SPINDLE DRILL HEAD
651A		COMMANDER MULTI-SPINDLE DRILL HEAD
651B		COMMANDER MULTI-SPINDLE DRILL HEAD
651C		COMMANDER MULTI-SPINDLE DRILL HEAD
652	LOT	ASS'T. CUTTERS
653		10' MET. WORKBENCH
654		ALLEN 4-SPINDLE GANG DRILL, 46" X 21" TABLE, 220V, 3 PH., INDIVIDUAL HEADS
655		ALLEN 4-SPINDLE GANG DRILL, 46" X 21" TABLE, 3 H.P., 3 PH., 220V, 3 PH., INDIVIDUAL HEADS
656		30" X 20" DEGREASING TANK, W/ DRAINBOARD & EXHAUST HOOD
657		72" WOOD DOWNDRAFT TABLE, W/ 1D CAB. & CONTENTS
658	LOT	ASS'T. HOLD DOWNS, DRILL BITS, WOOD TABLE, W/ MAG. LIGHT
659	LOT	ASS'T. DRILL BITS, REAMERS, SET SCREWS, MET. PARTS CAB. & WOOD CAB.
660		ALLEN 4-SPINDLE GANG DRILL, 46" X 21" TABLE, 220V, 3 PH., INDIVIDUAL HEADS
661		6' WOOD DOWNDRAFT BENCH, W/ 48" X 30" EXHAUST HOOD
662		BURGMASTER TURRET DRILL, M/N A, S/N 115, 6 POSITION TURRET, 20" X 14" TABLE, 5 H.P., 3 PH.
OUTSIDE
663		W.W. SLY DUST COLLECTOR, 6' X 6' MET. HOPPER, W/ MET. FRAMED LEGS
664		W.W. SLY DUST COLLECTOR, 5' X 2' MET. HOPPER, W/ MET. FRAMED LEGS
665		PANGBORN DUST COLLECTOR, M/N CD-1, S/N 1CD1-6529, 3' X 2' MET. HOPPER, W/ MET. FRAMED LEGS
666		TORIT CYCLONE DUST COLLECTOR, M/N 20-5-FM-55, 4' X 4' MET. FRAME
667		TORIT CYCLONE DUST COLLECTOR, M/N 20-5-FM-55, S/N M-1109, 4' X 4' MET. FRAME
668		8' WOOD FLIP TOP STORAGE BOX
669	24	ASS'T. PORT. CARTS
INSIDE
670		ALLEN 4-SPINDLE GANG DRILL, 46" X 21" TABLE, 220V, 3 PH., INDIVIDUAL HEADS
671		TAYLOR FENN 4-SPINDLE GANG DRILL, 55" X 16" TABLE, 3/4 H.P., 3 PH., INDIVIDUAL HEADS
672		4-SPINDLE BORING DRILL, W/ BOSTON SPEED REDUCING ATTACH., 440V, 3 PH.
673		EX-CELLO PRECISION BORING MACHINE, M/N 1212A, S/N 20823, 2 H.P., 3 PH.
674		HEALD BORE-MATIC MACHINE, M/N 222, S/N 35106, W/ RED HEAD SPINDLES, 440V, 3 PH.
675		48" MET. WORKBENCH
676		EX-CELLO PRECISION BORING MACHINE, M/N D-B-1212A, S/N 20408, 2 H.P., 3 PH.
677	LOT	JOB LOT
678		15' WOOD WORKBENCH, W/ MET. LEGS
679		L-SHAPED WOOD WORKBENCH, W/ MET. LEGS
680		10' MET. WORKBENCH
680A		SPANMASTER 1/2 TON OVERHEAD CRANE, 12' SPAN X 12' RUNWAY, W/ CM ELEC. HOIST, W/ PENDANT CONTROLS, 1/2 TON CAP.
681		KEARNEY & TRECKER MILWAUKEEMATIC 180 HORIZ. MACHINING CENTER, S/N 7185869, W/ 30 POSITION ATC, PALLET CHANGER & TAPE-O-MATIC CONTROL, A/C UNIT, 440V, 3PH.
682	LOT	ASS'T. TOOLING
683		CINCINNATI HORIZ. MILLING MACH., M/N 2-18, 10" X 36" TABLE, 5 H.P., 3 PH.
684		B&S HORIZ. MILLING MACH., M/N PLAIN 12, S/N 3471, 8" X 32" TABLE, 1 H.P., 3 PH.
685		TAYLOR FENN VERT. MILLING MACH., M/N 50A, S/N 335-774, 8" X 26" TABLE, 1 H.P., 3 PH.
686		MILWAUKEE VERT. MILLING MACH., M/N H, S/N 31-3706, 10" X 48" TABLE, 5 H.P., 3 PH.
687		W.W. SLY DUST COLLECTOR, 5' X 5' MET. HOPPER, W/ MET. FRAME
688		CUSTOM RESETTING TOOL, W/ 18" X 18" X 1" STEEL SURFACE PLATE
689		4" SWIVEL SHOP VISE, W/ 15' WOOD WORKBENCH
690		STANLEY 8" D.E. BENCH GRINDER, 1/2 H.P., 1 PH.
691	LOT	ASS'T. DESK, FAN, TAPE RECORDER, ETC.
692		G.E. ELEC. HEAT TREAT FURNACE, MOD. RRB-18, 18" X 36" X 22" CHAMBER, 440V, 3 PH.
693		G.E. ELEC. HEAT TREAT FURNACE, MOD. RRB-18, 18" X 36" X 22" CHAMBER, 440V, 3 PH.
694		COOLEY ELEC. HEAT TREAT FURNACE, M/N BL241848, S/N 9849, 18" X 36" X 22" CHAMBER, 440V, 3 PH.
695		ECLIPSE 14" SALT POT HARDENING FURNACE (GAS)
696		48" X 30" MET. COOLING TANK, W/ GALV. EXHAUST HOOD
697		WEBBER LOW TEMP. ENVIRONMENTAL CHAMBER, M/N WB-16-140, S/N 9-66-9, 220V, 3 PH.
698		CARBO CLEANER DUST COLLECTOR, 220V, 3 PH.
699		48" X 22" MET. DEGREASER, W/ CONTROLS
700		LEAD FORMER
700A		BUZZER GAS MELTING POT
700B		ANVIL
701		30" X 30" PORT. HYD. DIE CART
702		40" PORT. H.D. CART
703	2	40" PORT. H.D. CARTS
704		20' 1/2 STEEL BEAM, W/ YALE CHAIN HOIST, 1/2-TON CAP.
705		5' X 3' STEEL COOLING TABLE
706		12' 1/4 TON I-BEAM, W/ DAYTON ELEC. HOIST, W/ PENDANT CONTROL, 1/4-TON CAP.
707		6' X 3' MET. DEGREADING TANK, W/ PUMP
708		HEVI-DUTY 48" SHAKER OVEN, M/N M-0534-S, S/N 83445, 1,900 DEG. (C) MAX. TEMP., 440V, 3 PH., W/ CONTROL
709		LINDBERG ELEC. OVEN, M/N 54032, S/N 767723, 1,200 DEG. (C) MAX. TEMP., 115V, 1 PH.
710		CUSTOM HAND TAPPER
711	LOT	ASS'T. FURNACE POTS
712		L-SHAPED WOOD WORKBENCH
713	LOT	ASS'T. BASKETS, GLOVES, FITTINGS, DUST MASKS, ETS., W/ MET. SHELVING
PLATING AREA
714		80" X 32" MET. NICKEL PLATING LINE, W/ PUMP, (23) ANODES, G.E. RECTIFIER
715	6	ASS'T. S.S. & MET. RINSE TANKS, W/ (4) SERFILCO PUMPS
716		36" X 30" POLY PHOSPHORIC ACID TANK, W/ CONTROLS
717	94	ASS'T. DIPPING RACKS
718		8' WOOD WORKBENCH
719	LOT	ASS'T. MET. BASKETS, HOSE & WOOD TRAYS
720		4' SWIVEL SHOP VISE
721	2	ASS'T. WOOD WORKBENCHES
722		INGERSOLL-RAND HORIZ. 3-STAGE AIR COMPRESSOR, M/N 20T, S/N 227185, 20 H.P., 3 PH.
723		INGERSOLL-RAND 3-STAGE AIR COMPRESSOR CYLINDER, M/N 15T, S/N 30T388777, 3 PH.
724		INGERSOLL-RAND 3-STAGE AIR COMPRESSOR CYLINDER, M/N 15HE, S/N 30T613943, 3 PH.
725		CUSTOM 3" BELT SANDER, 2 H.P., 3 PH.
726		PERKINS MECH. PUNCH PRESS, MOD. S-JUNIOR, 1/3 H.P., 1 PH., W/ THUMB CONTROLS
727		BRIDGEPORT D.E. H.D. BUFFER, M/N 194, 220V, 3 PH.
728		PRESSURE-BLAST WET/DRY BLAST CAB., M/N AA, S/N 794, 32" X 24" X 16" CHAMBER, 115V, 1 PH.
COMPRESSOR ROOM
729		INGERSOLL-RAND 3-STAGE AIR COMPRESSOR, M/N 15TE, S/N 206981, 15 H.P., 3 PH.
730		INGERSOLL-RAND 3-STAGE AIR COMPRESSOR, M/N 15T, S/N 00005698, 15 H.P., 3 PH.
731		INGERSOLL-RAND 3-STAGE AIR COMPRESSOR, M/N 15T, S/N 00006029, 15 H.P., 3 PH.
732		3" H.D. BELT SANDER, 2 H.P., 3 PH.
733		HAMMOND D.E. H.D. BELT SANDER, M/N 3-RR0, S/N 7319, 3 H.P., 3 PH.
734		PRESSURE BLAST ROTARY BLAST CAB., M/N 1, 220V, 3 PH.
735		PRESSURE BLAST ROTARY BLAST CAB., M/N 1, S/N 4481, 220V, 3 PH.
736		W.W. SLY DUST COLLECTOR, S/N H6892-A, 36" X 29" MET. HOPPER, W/ MET. FRAME
737		HANKISON AIR DRYER, M/N PR200, S/N PR200A-2A-9901-5G, 220V, 3 PH.
738		HAMMOND D.E. H.D. SANDER & BUFFER, M/N UBG-8-65, S/N 2054, 220V, 3 PH.
739		CUSTOM 2" BELT SANDER, 2 H.P., 3 PH.
740		TORIT DUST COLLECTOR, M/N 80CAB, S/N 16628959-100, 220V, 3 PH.
741	2	ASS'T. MET. RACKS
742		MET. & WOOD RACK
743		48" S.S. 2-COMP. DRAIN SINK
744	2	TUMBLER BARRELS
745		2D MET. STORAGE CAB., W/ CONTENTS
746	2	ASS'T. SECT.'S MET. LOCKERS
747	LOT	ASS'T. FILE CAB.'S, DESK, WOOD RACK, MET. RACK, ETC.
748		BRADLEY EYE WASH STATION
749		BRADLEY EYE WASH STATION
750		4" SWIVEL SHOP VISE, W/ MET. BENCH
751		8' X 2' 6-COMP. MET. FINISHING STONE DISPENSER
752		48" X 27" MET. ACID DIPPING TANK, W/ ANODES & CONTROLS
753		CREST S.S. ULTRASONIC PARTS CLEANER, M/N 1M-4310,0492, W/ CONTROLS
754		HARSHAW CENTRIFUGAL DRYER, M/N 1, 220V, 3 PH.
755		48" X 24" MET. ACID DIPPING TANK, W/ ANODES & CONTROLS
756		CUSTOM 32" ROTARY FINISHING TUMBLER, 440V, 3 PH.
757		SAMCO WATER EVAPORATOR, M/N 500-304, S/N 442, 195,000 BTU'S, 115V, 1 PH.
758		SAMCO WATER EVAPORATOR, M/N 500-316, S/N 663, 195,000 BTU'S, 115V, 1 PH.
758A		HANKISON COMPRESSED AIR DRYER, 220V, 3 PH.
759		CUSTOM MET. PARTS FEEDER, W/ MOTORIZED BELT CONVEYOR, 1/3 H.P., 3 PH.
760		ULTRAMATIC PORTA BLURR MACH., MOD. PORTABURR 3, S/N 7809, 3/4 H.P., 1 PH.
761		BAIRD TILTING FINISHING BARREL TUMBLER, 1 H.P., 3 PH.
762		HONITE 20" ROTARY FINISHING TUMBLER, M/N 202, S/N 869, 1/2 H.P., 3 PH.
763		RAMPE D.E. BARREL FINISHER, M/N RT-2, S/N 1264-2216, 220V, 3 PH.
763A	LOT	ASS'T. MEDIA
764	19	BOXES FINISHING STONES
765		GRIEVE 2D ELEC. OVEN, M/N HB-500, S/N 510262, 500 DEG. MAX. TEMP., 220V, 3 PH.
766		ALSOP S.S. MIXING TANK
767		CUSTOM MIXER, 1/3 H.P., 1 PH.
768		CUSTOM VACUUM MANIFOLD PUMP, W/ 2 POLY TANKS, 1/3 H.P., 1 PH.
769		EXHAUST FILTERS
770		EXHAUST FILTERS
771		1/4-TON I-BEAM, W/ BLOCK & TACKLE LIFTING FIXTURE
772	LOT	ASS'T. DIPPING RACKS, WOOD CRATES, MOLASSES
773		7' WOOD WORKBENCH
774		PORT. SIFTING CART
775		MET. LOCKERS
776		MET. LOCKERS
777		MET. LOCKERS
778	LOT	ASS'T. NUMEBER & LETTER STAMPS, W/ 2D MET. STORAGE CAB.
779		32" TUMBLER BARREL
780		PANGBORN 42" ROTRAY FINISHING TUMBLER, M/N 1 1/2 YA., 220V, 3 PH.
781		CUSTOM SINGLE SPINDLE BORING MACH., 3/4 H.P., 2 PH.
782		CINCINNATI HORIZ. MILLING MACH., 10" X 36" TABLE, 5 H.P., 3 PH.
783		B&S HORIZ. MILLING MACH., M/N 0Y, 22" X 6" TABLE, 440V, 3 PH.
784		ALZMETALL VERT. BORING MILLER, M/N AB5/S, S/N 1018, 30" X 22" TABLE, 5 H.P., 3 PH.
785		CUSTOM COLLET LATHE, 1/2 H.P., 3 PH.
786		LEBLOND ENGINE LATHE, 13" X 30", CROSS SLIDE & TAIL STOCK, 440V, 3 PH.
787		WARNER & SWASEY TURRET LATHE, M/N 3, S/N 507598, 6 POSITION TURRET, 440V, 3 PH.
788		LEBLOND ENGINE LATHE, 13" X 30" CROSS SLIDE & TAIL STOCK, 440V, 3 PH.
789	LOT	ASS'T. JAWS, BORING BARS, ETC., W/ WOOD CAB.
790		TAYLOR & FENN 4-SPINDLE GANG DRILL, 40" X 16" TABLE, 1/2 H.P., 3 PH.
791		TAYLOR & FENN 4-SPINDLE GANG DRILL, 40" X 16" TABLE, 1/2 H.P., 3 PH.
792	LOT	ASS'T. CHUCKS, TOOL HOLDERS, CENTERS, ETC.
793		4" SWIVEL SHOP VISE, W/ 15' WOOD WORKBENCH
794		CUSTOM REWIND MACH., 115V, 1 PH.
795		CUSTOM HORIZ. DRILL, 1/3 H.P., 1 PH.
796		CUSTOM TACK WELDER, 115V, 1 PH.
797		DI-ACRO MANUAL PIPE BENDER
798		D.E. FINISHING TUMBLER, 220V, 3 PH.
799		48" DOWN DRAFT BENCH, W/ EXHAUST & LIGHT, 115V, 1 PH.
800		CUSTOM LEAK DETECTOR, W/ CLAMP FIXTURE
801		VANTON ELEC. FLEX-I-LINER PUMP, M/N CC-PY30R,S/N 93280, 1/4 H.P., 1 PH.
802		DI-ACRO MANUAL SPRING WINDER, S/N H-2065
803		VARI-DRIVE BORING DRILL, 1/4 H.P., 1 PH.
804		PAINT MIXING MACH., 115V, 1 PH.
805		15' TWIN-SIDED WOOD WORKBENCH
806	2	10' X 3' RUBBER MATS
807	20	5' X 3' RUBBER MATS
808	19	6' X 2' RUBBER MATS
809	10	ASS'T. RUBBER MATS
810	22	ASS'T. RUBBER MATS
811	10	ASS'T. RUBBER MATS
812	20	ASS'T. RUBBER MATS
813		DI-ACRO POWER BENDER, M/N 150, S/N 15001090, 220V, 3 PH.
814	LOT	ASS'T. MISC. FIXTURES & TOOLING
814A		FIBRO 10" ROTARY TABLE
815		DI-ACRO POWER BENDER, M/N 8, S/N DE-1093
816		LANDA PORT. PARTS WASHER, M/N SPINJET-10, S/N P-1296-5218, 220V, 3 PH.
PAINT ROOM
817		5' X 4' X 32" MET. PAINT BOOTH, W/ EXHAUST, SWIVEL LIGHT, ETC.
817A		5' X 4' X 32" MET. PAINT BOOTH, W/ EXHAUST, LIGHTS, ETC.
818		BINKS MET. PRESSURIZED SPRAY PAINT SYS., S/N 52214 (1989)
818A		BINKS MET. PRESSURIZED SPRAY PAINT SYS.
819		MET. PRESSURIZED SPRAY PAINT SYS.
820		NORDSON PORT. AIR SPRAY UNIT
821		DESPATCH 4' X 7' X 5' 2D GAS FIRED OVEN, W/ CONTROLS, S/N 57648
822	2	60" PORT. DRYING RACK
823	LOT	ASS'T. BENCHES, BASKETS, SPRAY NOZZLES, ETC.
824		RED DEVIL VIBRATORY PAINT MIXER, S/N L-12469, 220V, 1 PH.
825		2D MET. FLAME PROOF CAB.
826		24" PORT. DRYING RACK
827	59	ASS'T. MET. GAS CANS
828	16	ASS'T. MET. GAS CANS
829	14	ASS'T. MET. GAS CANS
830	23	ASS'T. MET. GAS CANS
831	27	ASS'T. MET. GAS CANS
832		PROTECTOSEAL 24" MET. PARTS CLEANER, W/ PORT. MET. STAND
833		15' WOOD WORKBENCH
834		10' WOOD WORKBENCH
835		48" X 84" X 24" MET. SHELVING
836		36" X 84" X 16" MET. SHELVING
837	LOT	ASS'T. MET. LOCKERS
MELTING AREA
838		AMERICAN NATURAL GAS, CHAIN FEED FURNACE, M/N 54, W/ TANKS, PUMPS & OPERATORS PLATFORM & CONTROLS
839		HOMO ROTARY ELEC. FURNACE, S/N 1568141, 1200 DEGREE (F) MAX. TEMP., 220V, 3 PH.
840		PHOSPHORIC/SULFURIC ACID LINE, W/ ANODES, HEAT EXCHANGER, ASS'T. TANKS, PUMPS, CONTROLS, ETC.
841		1/4 TON STEEL I-BEAM, W/ CM ELEC. HOIST, W/ PENDANT CONTROL, 1/4 TON CAP.
842	LOT	JOB LOT
843		BRADLEY EYE WASH STATION
844		RED DEVIL VIBRATORY PAINT MIXER, 115V, 1 PH.
845		VIBRATORY PAINT MIXER, 115V, 1 PH.
846		30" X 30" MET. RINSE TANK
NEXT AREA
847		BRIDEPORT D.E. H.D. PEDESTAL GRINDER, M/N 194, W/ 2" BELT SANDING ATTACH., 3 H.P., 3 PH.
848		TORIT DUST COLLECTOR, M/N 64, S/N 11354, 1/2 H.P., 1 PH.
849		YOST 6 1/2" H.D. SWIVEL VISE, W/ 5' WORKBENCH
850		B&S S.E. HORIZ. DRILL, S/N 1664, W/ FLEX ARM LAMP, 220V, 2 PH.
851		RAPID FREQUENCY CO. INDUCTION HEATING SYSTEM, M/N 3110, S/N 3485, W/ WATER RECIRULATOR SYSTEM
852		DAYTON BLOWER UNIT, 1 H.P., 3 PH., W/ HOOD & HOSE
853		GAS APPLICANCE 20" ROTARY HEAT UNIT, M/N 510A, 115V, 1 PH.
854		DAYTON 7" D.E. BENCH GRINDER, M/N 42908C, 1/2 H.P., 1 PH.
855		TORIT DUST COLLECTOR, M/N 89, S/N A-1355, 3 H.P., 3 PH.
856		DUSTKOP DUST COLLECTOR, WALL MOUNTED
857		DUNHAMATIC SHOP LATHE, W/ CROSS SLIDE, 220V, 1 PH.
858		BURKE HORIZ. HAND MILLER, M/N 1, S/N B10105, 3/4 H.P., 3 PH.
859	LOT	ASS'T. PORT. RACKS, LAMPS, HAND TOOLS
860		36" DIA. PARTS CLEANER TANK
861	LOT	ASS'T. MET. PANS & MET. BASKETS, W/ WORKBENCH
862		6' X 2' MET. RINSE TANK
863		STERLING SPOT WELDER, M/N AP12M, S/N 3004, 45 AMPS, 220V, 3 PH.
864		CUSTOM STAMPING MACH., 1 PH.
865	LOT	ASS'T. ABRASIVE CLOTHS, LAMPS, BENCHES, HOSES, SHOP VISE, ETC.
866	4	ASS'T. FORM. TOP SEWING MACHINE BENCHES, W/ MOTORS & MET. DESK
867	LOT	ASS'T. STORAGE, FILE, PARTS CAB.'S, CLEANING SUPPLIES, REFRIG., FANS, ETC.
868		DAYTON 6" D.E. BENCH GRINDER, 1/4 H.P., 1 PH.
869		CUSTOM WIRE TEMPERING MACH., 1/6 H.P., 1 PH.
870		DELTA 8" D.E. BENCH GRINDER, 1/2 H.P., 1 PH.
871		STANLEY 8" D.E. BENCH GRINDER, 1/2 H.P., 1 PH.
872		ALLEN 4-SPINDLE GANG DRILL, 48" X 21" TABLE, 220V, 3 PH.
873		HELI-COIL FLEX ARM HI-SPEED PNEU. DRILL
874	2	2D MET. STORAGE CAB.'S
875		48" X 20" SEWING MACHINE TABLE, W/ MOTORS
876		48" X 20" SEWING MACHINE TABLE, W/ MOTORS
877		48" X 20" SEWING MACHINE TABLE, W/ MOTORS
878		48" X 20" SEWING MACHINE TABLE, W/ MOTORS
879		48" X 20" SEWING MACHINE TABLE, W/ MOTORS
880		48" X 20" SEWING MACHINE TABLE, W/ MOTORS
881		B&S 6" D.E. PED. GRINDER, 1/2 H.P., 3 PH.
882		KENT-OWENS HORIZ. MILLING MACHINE, M/N 1-14, S/N 1-14-1295, W/ 9" X 32" TABLE, 440V, 3 PH.
883		B&S SURFACE GRINDER, M/N 510, S/N 523-510-1282, 440V, 3 PH.
884		CINCINNATI HORIZ. MILLING MACHINE, 10" X 22" TABLE, 440V, 3 PH.
885		HAND MILLING MACH., 1/3 H.P., 3 PH.
886		MILWAUKEE HORIZ. MILLING MACHINE, M/N 2HL PLAIN, S/N 3-3744, 10" X 48" TABLE, 440V, 3 PH.
887		CINCINNATI HORIZ. MILLING MACHINE, 48" X 10" TABLE, 440V, 3 PH.
888		B&S DUST COLLECTOR, S/N 3858
889	LOT	ASS'T. GEAR BOXES, GEARS, PANELS, PULLEYS, MOTORS, ETC.

Top

Back to MAIN AUCTION PAGE