CNC VERTICAL MACHINING CENTERS

• Fadal CNC 6030 Vert. Machining Center, Mod. 907-1, S/N 9507396,

w/ 20 Position ATC, 60” x 30” T-Slot Production Table, # 40 Taper,

Coolant Sys., Fadal CNC 88HS Control, 20 H.P., 440V, 3 Ph.  (New 1995) •

• Fadal CNC 6030 Vert. Machining Center, S/N 9306414, 20 Position ATC,

60” x 30” T-Slot Production Table, # 40 Taper, Coolant Sys.,

Fadal CNC 88HS Control, 20 H.P., 440V, 3 Ph. •

• Fadal CNC 6030 Vert. Machining Center, S/N 9003055, w/ 20 Position ATC,

60” x 30” T-Slot Production Table, # 40 Taper, Coolant Sys.,

Fadal CNC 88 Control, 20 H.P., 440v, 3 Ph. •

• Fadal CNC 4020 Vert. Machining Center, Mod. 906-1, S/N 9411436,

20 Position ATC, 44” x 20” T-Slot Production Table, # 40 Taper,

Coolant Sys., Fadal CNC 88HS Control, 440V, 3 Ph. (New 1994) •

PLANER MILLS

• CincinnatiTwin Head Planer Mill w/ 144” x 40” T-Slot Production Table, Side Planer Head,

72” Travels & Itek 2-Axis D.R.O. & Pendant Control, 2 H.P., 3 Ph. •

• CincinnatiTwin Head Planer Mill w/ 144” x 40” T-Slot Production Table, Side Planer Head

& Pendant Control, 3 H.P., 3 Ph. •

• CincinnatiTwin Head Planer Mill w/ 96” x 32” T-Slot Production,

w/ Side Planer Head, 72” Travel & Pendant Control, 3 H.P., 3 Ph. •

• OhioTwin Head Planer Mill w/ 120” x 36” T-Slot Production Table, Side Planer Head,

Itek 2-Axis D.R.O. & Pendant Control, 3 H.P., 3 Ph. •

• Protace Hortz. Boring Mill, Mod. 4, S/N 16653, w/ 72” x 36” T-Slot Production Table

& Acu-Rite 3-  Axis D.R.O., 10 H.P., 3 Ph. •

GANTRY MILL

• L.W. Pond CNC Twin Head Gantry Mill w/ 144” x 78” T-Slot Production Table,

80” Travel w/ Dynapath Autocon Delta CNC Control, 5 H.P., 3 Ph. •

MILLERS

• BridgeportSeries I Vert. Milling Machine, S/N 220598, w/ 9” x 42” T-Slot Table

& Acu-Rite 2-Axis D.R.O., 2 H.P., 3 Ph. •

• BridgeportVert. Milling Machine, S/N 221173 w/ 9” x 42” T-Slot Table &

Acu-Rite 2-Axis D.R.O., 1 H.P., 3 Ph. •

• BridgeportVert. Milling Machine, S/N 200371, w/ 9” x 42” T-Slot Table,

Servo Power Feed w/ Acu-Rite 2-Axis D.R.O., 1 H.P., 3 Ph. •

• BridgeportVert. Milling Machine, S/N 80997 w/ 9” x 48” T-Slot Table, 1 H.P., 3 Ph. •

• Bohner & Kohle Vert. Milling Machine w/ 39” x 24” T-Slot Table, w/ Built-In Rotary Table,

BridgeportJ-Head & Newall 2- Axis D.R.O., 2 H.P., 3 Ph. •

LATHES

• Mazak 860 Engine Lathe, 20” x 36” B.C., S/N 32514,

w/ Cross Slide Tool Post, Tail Stock & Newall DPA2000 D.R.O., 440V, 3 Ph. •

• Clausing Mod. 17 Engine Lathe, 20” x 72” B.C., S/N 543552,

w/ Cross Slide Tool Post, Tail Stock & Itek D.R.O. •

• Hardinge Speed Lathe w/ Cross Slide, Tool Post, Tail Stock  •

DRILLS

• Carlton17” x 60” Radial Arm Drill w/ 60” x 42” T-Slot Table, 15 H.P., 3 Ph. •

• Caser 9” x 36” Radial Arm Drill, Mod. M, S/N 25821 w/ 36” x 24” T-Slot Table, 5 H.P., 3 Ph. •

SAWS

• Grob 24” Vert. Met. Bandsaw, Mod. NS24, S/N 3133 w/ Blade Weld Attach., 3 Ph. •

• Kalamazoo18” x 8” Horiz. Met. Bandsaw, S/N 13B280, 1 H.P., 1 Ph. •

• Craftsman 10” Table Saw, M/N 113, Tilting Arbor, 27” x 40” Table, 1 Ph. •

• Everett10” Cut-Off Saw, 3 H.P., 3 Ph. • Holmes 12” Cut-Off Saw, Ft. Oper. •

WELDERS

• MillerPort.AC/DC Gas Tungsten 300 Amp. Arc Welder, Mod. Syncrowave 300,

S/N JG121462  •

• HobartPort.300 Amp Arc Welder, Mod. C-500, S/N 16DW-10507 w/ Wire Feeder •

• LincolnPort.250 Amp. Arc Welder, Mod. 250, S/N A-719370 •

GRINDERS

• Ramco 20” x 8” Surface Grinder, Mod. STP-20AD, S/N 6350 w/ Coolant Sys., 3 Ph. •

• Abrasive 15” x 10” Surface Grinder, Mod. 1½, S/N 2459 w/ Coolant Sys., 3 Ph. •

• Michael Deckel Tool Grinder, 1 Ph., S/N 89-24395 •

• Darex D.E. Drill Sharpener, 1 Ph. •

• Rockwell 6” D.E. Ped. Grinder, 1 Ph., S/N 1153614 •

• Enco 6” D.E. Bench Grinder, ½ H.P., 1 Ph., w/ Met. Stand •

• Master 24” Disc. Grinder, 3 Ph., Mod. Dg-1 w/ Dust Collector •

• Dayton6” D.E. Bench Grinder, ½ H.P., 1 Ph. •

FORKLIFT TRUCKS

• ClarkLP Forklift, 106” Lift, Solid Tires, Rops, 5000# Cap., Mod. C50B, S/N 63-511 •

• Allis-Chalmers LP Forklift, 106” Lift , Solid Tires, Rops, 3000# Cap., 1,897 Hrs.,

Mod. FTB-30-24, S/N 42150000  •

BRIDGE CRANE

• AcecoMonoboxOverhead BridgeCrane, 36’ Span x 170’ Runway

w/ (2) Aceco 7½ Ton Electric Hoists & 6 Way Pendant Controls •

PLANT SUPPORT EQUIPMENT

• (2) Ingersoll Rand Twin Cyl. Horiz. Air Compr.’s, 7½  H.P., 3 Ph., Mod. 712T-100 •

• Ruemelin 7½’ x 12’ Blast Cab., Mod. W1D, S/N 32645 w/ Dust Collector •

• Simplicity 560 Gas Snow Blower • Power AmericaPower Washer, M/N 1422 •

• Simplex Heritage Digital Time Clock •

• (2) 30” x 30” Port. Hyd. Lift Tables • 11’ x 57” Elec. Sliding Welding Table •

• Pexto Hyd. Die Trucks, 1000# Cap., 24” x 24” Platform •

• Hyd. Die Truck, 24” x 24” Platform • Roller Conveyors •

• (11) Kennedy 6D Port Tool Chests • Port. Strapping Mach. •

            Hands Tools Including: Elec. Drills, Elec. Sabre, Jig & Circular Saws •

• Pneu. Die & Angle Grinders, Chisels, Palm Sanders, Etc., Etc. •

• Metco Type 10E Flame Spray Wire Gun • Weller Soldering Gun •

• Gesswein Flex Shaft Grinder • Ridgid Die Set 1/8” – 1” •

• (2) Ass’t. Elec. Engravers • Century Battery Charger, 6/12 Volt •

• Fluke Multimeter •  Roper Whitney XX Light Duty Punch w/ Dies •

• Ass’t. “C” & Twist Clamps • National Scale Port. Platform Scale •

• Budgit 1 & 2 Ton Elec. Hoists • Step & Extension Ladders •

• Hand Trucks • (27) Sect’s Met. Shelving • Met. Parts Racks •

• Port. Parts Cab.’s • Met. Storage Cab.’s • Ped. Shop Fans •

• Shop Carts & Stools • Workbenches • Lockers • Etc. • Etc. •

INSPECTION EQUIPMENT & TOOLING

• (2) Volstro Variable Angle Milling Heads • Volstro Rotary Milling Head •

• Alberti Umberto Angle Head, M/N TCUCN 2.5 • Yuasa Collet Spinner •

• Troyke 12” Rotary Table • Stevens 15” Rotary Table •

• (2) Kurt 6” Milling Mach. Vises • Kurt II 8” Milling Mach. Vise •

• Bridgeport, Victor, Palmgren 6” Milling Machine Vises •

• Jacobs Chucks • 3 Jaw Chucks • Sine Plates •

• (3) Starrett 24” & 12” Vernier Calipers • Mitutoyo 80” Vernier Caliper •

• Starrett 6” – 18” Height Gages • Brown & Sharpe 10” Height Gage •

• Mitutoyo 8” Dial Caliper • Fowler Depth Mic.’s • O.D. Mic.’s •

• Granite & Steel Surface Plates • Levels • Ass’t Number & Letter Stamps Sets •

• Boring Heads • Etc. • Etc. •

Lg. Quantity of Ass’t. Perishable Tooling Consisting of:

Drills, Reamers, End Mills, Taps, Etc. •

• (227) Ass’t. #40 Taper Tooling • Lg. Quantity Ass’t. Hold Downs•

• Lg. Quantity Ass’t. Socket Head Cap Screws • Etc. • Etc. •

OFFICE MACHINES

• Trillium Telephone System, M/N Panthem 612 w/ (5) Lines & (9) Ext.’s •

• (4) Dell Pent. 4 P.C.’s w/ Monitors, Keyboards & Mice •

• (5) Clone P.C.’s w/ Monitors, Keyboards & Mice •

• HP Designjet 1050C Plus Plotter • Encas Cadjet Plotter •

• Diazit Omonitrac EFP Blueprint Printer • HP Laserjet 6P Printer •

• (3) HP Deskjet Printers, Mod. 710, 660 CSE & 6122 •

• Panasonic KX P3626 Pin Printer • Sharp SF7900 Copier •

• Brother Intellifax 1270 Fax Mach. • Etc. • Etc. •

OFFICE FURNISHINGS

• Exec. & Sec. Desks, Chairs & Credenza’s • 9’ Form. Conference Table •

• (2) 7’ Drafting Tables • File Cabinets • Bookcases • Data & Folding Tables •

• Reception Furnishings Including: Sofas, Chairs, Tables, Etc. • Etc. •

VEHICLE

• 1993 Ford F-150 XLT Pickup Truck, A/T, A/C, AM/FM Stereo Cassette, 8’ Bed •

MOLD

• (New) Approx. 6000# single cavity machined aluminum structural foam mold to run on multi-nozzle structural foam machine. Mold is drilled & baffled for cooling with water manifolds and plumbing. Steel guided ejection with positive returns pins. Standard mold components used throughout. O.A. mold size: 48” x 57” x 20.250” shut height. •