VERSON COMPRESSION MOLDING PRESS

• Verson 4 Post Hyd., 4000 Ton Cap., 84” Stroke, 144” x 52” Between Posts,

 Mod. 4000-HD-4-144-96T, S/N 23353, w/ Reichel & Drews Custom Powder Coating System,

20 Gun Cap.; Nordson Color Module Fire Protection Sys., Pneu. Actuated Parts Fixture;

Vacuum Pick-up & Port. Sheet Payoff  Reel •

ERIE COMPRESSION MOLDING PRESSES

• Erie 4 Post Hyd. 1500 Ton Cap, 90” Stroke, 120” x 123” Between Posts,

S/N 21-8323 w/ Safety Curtain Lights & Port. Payoff Reel •

• Erie 4 Post Hyd. 2500 Ton Cap., 90” Stroke, 144” x 33” Between Posts,

S/N 21-7867 w/ Safety Curtain Lights & Port. Payoff Reel (New 1988)

w/ Nordson Powder Coating Sys., Gantry Tape w/ Pneu. Vacuum Generator Removal System •

• Erie 4 Post Hyd. 750 Ton Cap., 33” Stroke, 146” x 67” Between Posts,

S/N 21-6006 w/ Safety Curtain Lights & Port. Payoff Reel •

• Erie 4 Post Hyd. 650 Ton Cap., 48” Stroke, 80” x 42” Between Posts,

S/N R405E w/ Safety Curtain Lights & Port. Payoff Reel •

• Erie 4 Post Hyd. 400 Ton Cap., 60” Stroke, 72” x 32” Between Posts,

S/N SCR405 w/ Safety Curtain Lights, Port. Payoff Reel & Morpell Injection Mold System •

• Erie 4 Post Hyd. 300 Ton Cap., 48” Stroke, 78” x 36” Between Posts

w/ Safety Curtain Lights & Port. Payoff Reel •

WILLIAMS & WHITE COMPRESSION MOLDING PRESSES

• Williams & White 4 Post Hyd., 1500 Ton Cap., 72” Stroke, 112” x 34” Between Posts,

S/N C4016 w/ Safety Curtain Lights, Port. Payoff Reel, Pneu. Vacuum Generator

Removal System & 10’ Out Feed Conveyor •

• Williams & White 4 Post Hyd., 1000 Ton Cap., 72” Stroke, 120” x 42” Between Posts,

S/N C4201 w/ Safety Curtain Lights, Port. Payoff Reel, Pneu. Vacuum Generator

Removal System & Out Feed Conveyor •

• Williams & White 4 Post Hyd., 800 Ton Cap., 72” Stroke, 96” x 28” Between Posts,

S/N C4018 w/ Safety Curtain Lights & 2 Station Sheet Molding Payoff Reel •

• Williams & White 4 Post Hyd., 1000 Ton Cap., 90” Stroke., 170” x 42” Between Posts,

S/N C4267 w/ Safety Curtain Lights, Port. Payoff Reel, Pneu. Vacuum Generator

Removal System & Dual Out Feed Conveyors •

• Williams & White 4 Post Hyd., 600 Ton Cap., 48” Stroke, 60” x 40” Between Post,

S/N C4062A w/ Safety Curtain Lights & Port. Payoff Reel •

USI COMPRESSION MOLDING PRESS

• USI 4 Post Hyd., 1000 Ton Cap., 66” Stroke; 84” x 42” Between Posts,

S/N 11-5186, w/ Safety Curtain Lights & Port Sheet Payoff Reel •

DAKE COMPRESSION MOLDING PRESSES

• Dake 4 Post Hyd., 600 Ton Cap., 80” Stroke, 120” x 52” Between Posts,

S/N 155882 w/ Safety Curtain Lights & Port. Sheet payoff Reel •

• Dake 4 Post Hyd., 150 Ton Cap., 36” Stroke, 84” x 42” Between Posts, S/N 16986 •

HANNIFIN COMPRESSION MOLDING PRESS

• Hannifin 4 Post Hyd.; 350 Ton Cap., 36” Stroke; 77” X 38” Between Posts,

S/N T-4251 w/ Safety Curtain Lights & Hyd. Power Supply •

STRAIGHT SIDE MOLDING PRESSES

• Williams & White 1000 Ton Cap. Straight Side Hyd. Compression Molding Press, 48” Stroke,

90” x 64” Between Posts, S/N C3948 w/ Safety Curtain Lights & Port. Payoff Reel •

• Williams & White 750 Ton Cap. Straight Side Hyd. Compression Molding Press, 60” Stroke,

108” x 25” Between Posts, S/N C4263 w/ Safety Curtain Lights; Pneu. Vacuum Generator

Removal System, Dual Out Feed Conveyor System •

• Williams & White 2000 Ton Cap. Straight Side Hyd. Compression Molding Press, 82” Stroke,

120” x  44” Between Posts, Mod. SH2000, S/N C4226 w/ Safety Curtain Lights;

Pneu. Vacuum Generator Sheet Removal System & Sheet Payoff Reel •

H-FRAME MOLDING PRESS

• Hannifin Hyd. 100 Ton H-Frame Molding Press, 30” Stroke; 50” x 42” Between Posts,

S/N 2-19-99 w/ SMC Hyd. Power Supply & Dell P.C. •

COMPOUND MACHINE

• Sheet Molding Compound Machine 48” w/ Multi-Station Fiberglass Payoff Reel;

(2) Applicating Stations; Fiberglass Dispenser; Under & Over Mesh Belt Heads,

(Purchased New 2004 – Never Used) •

COMPOUNDING SYSTEM

Compounding System Consisting Of:

• 48” Sheet Molding Compounding Machine, Multi-Station Payoff Reel;

(2) Applicating Stations; Mesh Belt Conveyor; Film Payoff Station;

Topit Dust Collector; Brenner Festooner 4 x 4 x 4 Buck Head Unloading System,

2000# Cap.; Auger 25’ Incline Screw Conveyor System; Barrel Dumping Stand, 500# Cap.;

(2) S.S. Vertical Weigh Tanks; Cowler Morehouse Dispersion Mixer, 50 H.P., 3 Ph.;

Pumps, Transfer Tank, Mixers, Roller Conveyors & Controls •

LATHES

• Monarch Engine Lathe 26” x 96” B.C., Mod. 27N, S/N 5870 w/ Tooling •

• Monarch Engine Lathe 18” x 54” B.C., Mod. 16CY, S/N 15743 w/ Tooling •

• Monarch Engine Lathe 24” x 30” B.C., S/N 40596 w/ Tooling •

• Monarch Engine Lathe 18” x 54” B.C., S/N 29943 w/ Tooling •

• Monarch Engine Lathe 14½” x 30” B.C., Mod. 12, S/N 14194 w/ Tooling •

• Monarch Engine Lathe 18” x 48” B.C., Mod. 18SC, S/N 27025 w/ Tooling •

• LeBlond Regal Engine Lathe 13” x 24” B.C., Mod. 13, S/N E6290 w/ Tooling •

MILLING MACHINES

• Bridgeport Vert. Miller, 9” x 42” Table, Power Feed, 1 H.P., 3 Ph., S/N 40827 •

• Bridgeport Vert. Miller, 9” x 42” Table, 1 H.P., 3 Ph., S/N 49025 •

• Enco Vert. Miller, Vari-Sp., 3 H.P., 3 Ph., S/N 8507742 •

• K & T 5H Horiz. Miller, 18” x 19” Table, 3 Ph., S/N 13-3281 •

• P & W Horiz. Miller, 24” x 48” Table, 3 Ph., Mod. 3620, S/N M1710-8417 •

GRINDERS

• Jakobson 10” x 30” Surface Grinder, 3 Ph., Mod. 16, S/N 6935 w/ Coolant •

• Hammond 6” x 18” Surface Grinder, 1 H.P., 3 Ph., Mod. 2, S/N 904 w/ Dust Collector •

• Cincinnati Tool & Cutter Grinder, 3 Ph., Mod. 2, S/N 1D2T1S203 •

• Black Diamond 8” Drill Grinder, 1 Ph., Mod. 18, S/N 14136 •

• Lisle Drill Grinder, 1 Ph., Mod. S1000, S/N 1040 •

• Baldor 6” D.E. Carbide Ped. Grinder, ½ H.P., 1 Ph., Mod. 501 •

• Van Dorn 8” D.E. Bench Grinder, ¾ H.P., 1 Ph., S/N G894581 •

• Sunex 8” D.E. Ped. Grinder, ¾ H.P., 1 Ph., Mod. 200KL •

• 8” Belt Grinder w/ 20” Disc Sander, 1 H.P. •

• 6” Belt Grinder w/ 9” Disc Sander, ¾ H.P., 1 Ph. •

DRILLS

• Abroga 3’ x 9” Radial Arm Drill, Mod. EP830 •

• Leland-Gifford 24 Drill Press, Fl Type, 1 H.P., 1 Ph. •

• W.T. 15” Ped. Drill Press, 1 Ph. •

• Wilton 20” Ped. Drill Press, 1 H.P., 1 Ph. •

• Clausing 20” Ped. Drill Press, 1 H.P., 3 Ph. •

• Central 17” Ped. Drill Press, 1 H.P., 1 Ph. •

• Hayton 14” Ped. Drill Press, ½ H.P., 1 Ph. •

• Jet 14” Ped. Drill Press, ½ H.P. 1 Ph. •

SAWS

• DoAll 16” Vertical Metal Band Saw, 3 Ph., Mod. 16-2, S/N 45-55522, w/ Weld Attach. •

• DoAll 15” Vertical Metal Band Saw, 3 Ph., Mod. BF •

• Kysor Johnson 10” x 16” Horiz. Metal Band Saw, 3 Ph., Mod. B •

• Rockwell Delta 13” Metal Band Saw, Bench Type, 1 Ph. •

• Pro-Tec 10” Table Saw, 24” X 18” Table, S/N 10700377 •

• Everett 10” Chop Saw, 1 Ph. •

• Wells 7” x 17” Horiz. Met. Band Saw, ¼ H.P., 1 Ph. •

• Marvel 8” x 15” Power Hacksaw, Mod. 2 •

SHEAR

• Brown Bog-S-1 Hamilton 10’ x 16GA Shear, Mod. 13121 w/ 8’ Feed Table •

MISCELLANEOUS MACHINERY

• (2) Niagara 4’ Shears, 16 GA Mild •

• Rockwell 6” Belt Sander, 1 H.P., 3 Ph., Mod. 31-501 •

• Wilson 75 Ton H-Frame Press, Mod. 37FX, S/N 3598 •

• Jet Stream 24” x 16” x 12” Blast Cabinet, 1 Ph. •

• Welding Positioner 36” •

• Canedy-Otto # Arbor Press •

MISCELLANEOUS EQUIPMENT

• Dynaseal Single Stage Vac. Pump Sys., 25 H.P., 3 Ph. w/ Sullair VS-12 Vac. Pump •

• Nordson Rotary Sieve, Mod. 2V9250 w/ Torit Dust Collector, 3 Ph. •

• EMC2 Injection System w/ Graco Pump •

• (2) Marley Cooling Towers, Mod. 47150 w/ Super Aqua Tower •

• Water Treatment System w/ (3) Poly Tanks, (2) Fiberglass Tanks, Pumps & Controls •

INSPECTION EQUIPMENT & TOOLING

• Mitutoyo 24” & 40” Dig. Ht Gages •

• Mitutoyo Dial Ht Gages •

• Vernier Calipers • Dial Test Indicators •

• Dig. & Dial Indicators •

• Dig. O.D. Micrometers •

• O.D. 1D & Depth Micrometers •

• Gage Block & Parallel Block Sets •

• Pin Gage Sets • Angle & Step Blocks •

• Dial Bore Gages • Mag. V-Blocks •

• Dig. Thermometers • Tapping Heads •

• Granite Surface Plates • Etc. Etc. •

• Gorton 12” Rotary Table •

• Bridgeport & Enco Milling Mach. Vises •

• Boring Heads • Collet Sets • Jacob Chucks •

• 3 & 4 Jaw Lathe Chucks • Etc. Etc.

Gd. Qty. Perishable Tooling Including: Drills, Reamers, Taps, Cutters, End Mills, Etc.

LAB EQUIPMENT

• Nikon Microscope 4X Max •

• Ashland Laser Surface Analyzer • LVT Viscometer •

• Fisher Viscometer 392 • Brookfield Dig. Viscometer DV-11 •

• (2) Q-Panel Granesometers • VWR 1275 Water Bath •

• (2) Instron Tensile Testers • Glas-co TM106 Warmer •

• Premier Dispersator, 1 Ph. • Ass’t. Dispersion Mixers •

• Gilian Calibration Punch • Quest Sound Calibration System •

• Blue M 1D Elec. Furnace 2750° Max, Mod. RG3080C •

• (3) Blue M Elec. Ovens 200°-500° Max •

• Mettler Analytic Bal. Scale 160 GM Cap. •

• Mettler Dig. Analytic Gram Scale AE100 •

• Sartorius Dig. Scale 1200 Gm Cap. •

• Sartorius Top Load Bal. Scale •

• (10) Ass’t. Dig. Counting Scales • Etc. Etc.

CNC PANEL ROUTER

• ABC Auto. CNC Panel Router, 3 Axis Router Head, Layout Table, CNC Controls •

WRAPPING MACHINE

• Highlight 60” Rotary Stretch Wrapping Machine, Vari-Speed, 3 PH., Mod. Synergy II •

PAINT BOOTHS

• (2) Torit 16’ x 16’ x 7’ Met. Paint Spray Booths w/ Blowers & Dust Collectors •

• Binks 5’ x 6’ x 8’ Port. Paint Spray Booth w/ Blower, Exh. & Lights •

• Port. Paint Spray Booth 6’ x 5’ x 7’ w/ Blower & Ex. •

WATER CHILLER

• Conair Port. Water Chiller, 5 H.P., 3 Ph., Mod. MPA-5, S/N 55827 •

ROTARY VACUUM PUMP

• Dekker Single Stage Rotary Vacuum Pump, Mod. VMX0550KWI

w/ Accumulation Table & Receiving Tank, 40 H.P., 3 Ph. & Controls (New 1998) •

BOILERS

• Mohawk Boiler Gas/Oil, 751 Sq. Ft. Heat Surface, 5175# /HR., Mod. 4-5-751 (1987) •

• Burnham Boiler, Nat. Gas, 358 Sq. Ft. Heat Surface, 5175# /HR., Mod. 3P-150XP •

• North American Boiler, Nat. Gas, 358 Sq. Ft. Heat Surface, Mod. 8023 •

• Orr & Sembower Boiler, Gas/Oil, 753 Sq. Ft. Heat Surface, Mod. 3G •

• York-Shipley Boiler Gas/Oil 5021M/ BTU’s/ HR, Mod. N5 •

COMPACTOR

• Master Horiz. Hyd. Trash Compactor 40 Cu. Ft., 25 H.P., 3 Ph. w/ Hyd. Power Supply •

COMPRESSORS

• (2) Atlas Copco Rotary Screw Air Compressors, 150 H.P., 3 Ph., Mod. GAU1107 •

• Gardner-Denver Rotary Screw Air Compressor, 125 H.P., 3 Ph., Mod. EAQSNE (New 1989) •

• I.R. 2 Stage Air Compressor, 15 H.P., 3 Ph. •

• Quincy 2 Stage Air Compressor, 10 H.P., 3 Ph. •

• (2) Ultra-Air Compressed Air Dryers, 3 PH., Mod. UA201-800DW •

• I.R. Air Dryer, 1000 SC FM, Mod. DXR1000W (New1999) •

• Pneumatics Heatless Regenerative Air Dryer, Mod. PH-300 •

• I.R. 2-Stage Air Compressor, 5 H.P., 3 Ph. •

• Fluid Energy Oil Less Air Compressor, 2 H.P., 1 Ph. •

WELDERS

• Lincoln Elec. Pro-Cut 55 Plasma Cutter, Mod. 11012 •

• Lincoln Port. ARC Welder, 1 Ph., Mod. WELDPACK 100 •

• (2) Miller Port. Dial ARC 250 Amp AC/DC ARC Welders, Line Weld 250 Amp, Port. DC Welder •

• Sciaky Spot Welder 75KVA, 3 Ph., Mod. PWM0-1 •

• Cutting & Welding Outfits •

FORKLIFTS

• Caterpiller LPG Forklift, 30,000# Cap., 2 Stage Mast., Rops, Mod. T300 •

• Hyster LPG Forklift, 16,000# Cap., 129” Lift, Rops, Mod. S125A •

• Hyster LPG Forklift, 5,000# Cap., 3 Stage Mast, Rops, Mod. S50XL •

• Komatsu LPG Forklift, 4,000# Cap., 3 Stage Mast., Rops, Side Shift, Mod. FB25SHE •

• Toyota LPG Forklift, 4,000# Cap., 187” Lift, Rops, Side Shift, Mod. 42-6FG25 •

VEHICLES

• 1995 Chevrolet 2500 Pickup •

• 1992 GMC Vandura 2500 Cargo Van, AT •

• 1989 GMC Rally STX Passenger Van •

PLANT SUPPORT EQUIPMENT

• American Floor Sweeper, Mod. 78616 •

• Hydro Elec. Floor Cleaner w/ Charger •

• Bishamon, Wesco & B.T. Lifter Hyd. Pallet Jacks, 5000# Cap. •

• Free Standing 360°-3 Ton Jib Crane w/ Budgit 3 Ton Elec. Hoist •

• Super Master Hyd. Shop Crane, 2,000# Cap. •

• Biljax Port. Manlift, 500# Cap. •

• Forklift Barrel Clamp Attachments •

• (2) Ridgid #535 Port. Elec. Pipe Threaders •

• Milw. 14” Chop Saw • Elec. & Pneu. Drills, Grinders, Sanders, Impact Wrenches, Etc. •

• Riveters • Pipe Wrenches • Vises •

• Dust Collectors • Parts Washers • Snowblower •

• (2) Hi-Jack Lifts 300# Cap. • 25 Ton Cable Hoist •

• Hyd. Lift Tables • Port Die Trucks • Floor Scales •

• Steel Pallet & Cantilever Racking • Met. Shelving •

• Steel Dump Hoppers • Met. Scrap Bins • Roller Conveyors •

• (300) 5’ Stackable Met. Racks • Barrel Clamps •

• T & S 11’ x 8’ Port. Steel Gantry, 2000# Cap. •

• (20) Pedestal Shop Fans • Strapping Machines •

• Hand, Barrel & Platform Trucks •

• Step, Stock & Ext. Ladders •

• Parts, Storage & Flameproof Cabinets •

• Ass’t. Motors & Pumps • Fire Extinguishers •

• Met. Shop Carts & Stools • Workbenches • Lockers • Etc. Etc.

OFFICE MACHINES

• Xerox 2520 Blueprint Copier • H.P. Draftmaster I Blueprint Copier •

• Canon NP4050 Copier w/ Collator • Canon NP1820 Copier •

• Brother Intellifax 2800 Copier/Fax • Lanier 1260 MFD Fax • H.P. Workstation 8000 P.C. •

• (2) H.P. Compaq P IV P.C.’s • (2) H.P. Pavillion 520N & 6635 P.C.’s •

• (6) Dell Dimension 4100; V350 & R350 P.C.’s • (3) Dell Optiplex GX110 P.C.’s •

• (7) H.P. LaserJet Printers 4P; IIISI; 2300A; 3200; 3330; 4050N •

• (4) H.P. DeskJet Printers, 610C; 840C; 895CSE &1220C •

• H.P. All-In-One Office Mach. PSC2175 • H.P. Printer/Scanner/Copier PSP500 •

• Samsung Printer ML-1650 • Visioneer 6100 Scanner •

• (2) Fellows Paper Shredders • Zebra Stripe Label Printer •

• Amano EX7000 Time Clock • Sharp Zoom 12 Video Camera •

• Zenith 19” Color T.V. • Sony & RCA VCR’s •

• Dig. Elec. Calculators • Typewriters • Refrig./Freezers • Microwave Ovens • Etc. Etc.

OFFICE FURNISHINGS

• 4’ Oak Conference Table w/ Chairs • (25) Executive & Secretarial Desks •

• (96) Executive, Secretarial, Arm & Stackable Chairs •

• Credenzas • Bookcases • Storage Cabinets • (40) Ass’t. 2-3-4 & 5D Met. File Cabinets •

• Maylins 4’ x 6’ Drafting Table • Quarier- Ovonics 3100 Port. Lighted Marking Board •

• Bradford Port. Video Cabinet • (20) Formica Folding Tables •

INTELLECTUAL PROPERTIES

• Customers Lists • Patents • Designs •

• Trademarks • Logos • Drawings • Etc. •