LAMINATOR/SHEETER

• Marquip Sheeter, Mod. 14-L; S/N 71043-1100 (New 1997) w/ Allen Bradley DTAM Plus PLC,

4 Knife Section & Custom 66” Laminator 4 Stand Unwind Section;

Paster 6 Can Dryer Section w/ Southwork Hyd. Scissor Lift •

EMBOSSERS

• 60” Embosser/Slitter – 5 Knives Air & Hyd. Pressure Gauges;

Rewind Section 10 H.P. Vari-Speed; Embossing Roll Drive, Vari-Speed •

• Service Machine 64” Embosser, Unwind Stand 25 H.P. Vari-Speed, Dynamatic Main Drive,

Hyd. Pressure Controls Left & Right Side, Fife Guide System •

• Hudson 62” Shark Embosser, 25 H.P., Drive, Fife Guide System, S/N 1318 •

• Perkins 65” Embosser, Auto Tension Controller, 50 H.P. Hyd. Unit,

Mantalva Remote Valve PDA; Hydralign Quick Draft Blower •

• Norwood 44” Embosser, 7½ H.P. Vari-Speed; Dynamatic Adj. Speed Motor Drive,

Horton Pneumatics Push Button Controls •

• 44” Embosser, 20 H.P. Adjust Speed Drive; Pneumatic Adjustment Vari-Speed; EMS Controls •

• B.F. Perkins 40” Embosser, 7½ H.P., Manual Adjustment •

SHEETERS

• Moore & White 66” Sheeter, Vari-Speed, Push Button Controls •

• Hamblet 64” Sheeter, Double Unwind Stand, w/ Digital Counter;

Clark Aikens Stacker, Mod. D-1964; Mamco Conveyor Section,

Durant Digital Sheet Counter, S/N DLOE1127 •

• Goebel 50” Sheeter, Mod. FQV, 10 H.P.; w/ 1500 RPM Sheeter Table •

• 64” Sheeter Unwind Section; CMS Coater & Moisturizer, Mod. C-203,

Sheeted Section, 2 Knives & Lift Table •

SLITTER-REWINDERS

• Cameron 60” Camachine 10” Slitter Rewinder, Edge Guiders, Rewind Section, Vari-Speed •

• Cameron 74” Camachine 10” Slitter Rewinder, Hydralign Wb Guide, Mod. A201-9, Vari-Speed •

• Valmet – Wartsila 94” Slitter Rewinder, 2000 FPM; Enclosed Gear Drive, Vari-Speed;

Trim Blower; 4 Rider Rolls; Fife Gauge Guides; 5 Knives; Power Unwind Section

w/ Sandy Hill 84” Embosser, Air Loaded 15 H.P., 3 Ph. •

GUILLOTINES

• Seybold 84” Guillotine Shear, Microcut Back Gauge •

• Lawson 65” Guillotine Shear, Manual Back Gauge •

LAMINATORS

• 66” Laminator, Single Stack Unwind Section; Paste Roll Section; Smoothing Bar;

Air Roll Adjustment; Rewind Section, 20 H.P., Vari-Speed; Laminator Roll Section,

15 H.P., Vari-Speed •

• 50” Laminator Triple Unwind Section; Eurotherm Vari-Speed Rewind Drive Section;

Electronic Web Controls; Paste Roll Section •

COATER

• Waldron Microjet Coater 64” Wide 150’ – 3 Zone Gas Dryer,

w/ Nanmex Temp Control, w/ Sturtevant Blower Sys.,

Size 80 & Auto Oiler Sys., w/ Rewinder •

AIR COMPRESSORS

• I.R. Rotary Screw Air Compressor, 30 H.P., 3 PH. Digital Controls •

• Worthington Rotary Screw Air Compressor, 20 H.P., 3 PH. •

• Sullair Rotary Screw Air Compressor, 30 H.P., 3 PH. •

• Devilbiss Single Cylinder Air Compressor, 15 H.P., 3 PH. •

• Zeks Air Dryer, Mod. 15VNCCA200 •

• Arrow Pneumatics Air Dryer, Mod. 5310-1 •

BALER

• International Horiz Hyd. Baler, 17’ x 3’ x 3’, Mod. 1260B, S/N 059065 •

PALLET WRAPPERS

• Automatic Pallet Wrapper 60” Diameter Turntable •

• PS&D Auto Pallet Wrapper 60” Diameter Turntable •

• Lantech Auto Wrapper 60” Diameter Turntable, Mod. Q •

SHRINK WRAPPER

• Eastey Heat Shrink Tunnel, Mod. ET608, w/ Shrink Wrap Unit,

16” Conveyor, S/N 110111608TL208•

PRINTING PRESSES

• 4 Color 58” Printing Press, w/ Laminating Section; Hobes Unwind Section;

4’ Overhead Dryer Section, w/ Digital Temp. Controls •

• 4 Color 60” Printing Press, w/ Laminating Section; Rewind Section; Roll Lift Station;

Digital Counter & Temp Controls; Unwind Section, w/ Hydration Controls •

• 2 Color 58” Printing Press, w/ Overhead Dryer Section; 10 H.P.,

Adj. Speed Rewind Motor; Prep Bath; Fife Guide System •

MACHINE TOOLS

• MSC Vertical Miller, 9” x 42” Table, S/N 470532 (New 1997) •

• Bridgeport Vertical Miller, 9” x 2” Table, S/N 37517 •

• Harrison 16” x 84” Geared Head Engine Lathe, S/N 403082 w/ Taper Attach •

• Putnam 40” x 9’ Lathe, Belt Drive, S/N 403088-3202 •

• Carolina 50 Ton H-Frame Hyd. Shop Press, Mod. CBP-1200 •

• Ramco 9” x 16” Horiz. Metal Band Saw, S/N 13471 •

• Dewalt 12” Radial Arm Saw, 3½ H.P., 3 PH., Mod. 7790 •

• Top Tool 10” Tilting Arbor Table Saw, 1 PH., Mod. RXW-10 •

• Eagle 15” Drill Press, 1 PH., Floor Type •

• Camel Back 22” Drill Press,  PH., Floor Type •

• CTT 15” Drill Press, 1 PH., Bench Type •

• (2) Baldor D.E. Grinders, 3 H.P., 3 PH. •

• Dayton 6” D.E. Bench Grinder • Sheldon #4 Arbor Press •

• Rogers Knife Sharpener, Mod. 2CC • Delta 12” Mitre Saw • Etc. • Etc. •

BLAST SYSTEM

• Airmex Accustrip Blast System, 90” Roll Turning Cabinets

w/ Bugo System Track Unit (New 1999) •

MISCELLANEOUS MACHINERY

• Moore & White Sheet Stacker 40” x 48” Capacity •

• 3-Twin City Blower, 5 H.P., 3 PH., Mod. RBW-5W •

• Quick-Draft Blower, 10 H.P., 3 PH., Mod. •

• Carrier Chiller, 48 Amps, Mod. 30HL025-640 •

MATERIAL HANDLING EQUIPMENT

• Clark Elec. Pallet Jack, 4,000# Cap., Mod. P40C •

• Clark Elec. Pallet Jack, 4,000# Cap., Mod. HWPVOC •

• Barret Elec. Pallet Jack, 3,000# Cap., Mod. PG-HS-30-20 •

• Barret Elec. Pallet Jack, 2,000# Cap., Mod. PG-AS-30-20 •

• Clark Walk Behind Reach Truck, 3,000# Cap. •

• (2) Presto Port. Hyd. Lift Trucks, 1,000# Cap. •

• Interthor Elec. Forklift, 2,200# Cap. •

• (2) Big Joe Port. Elec. Lifts, 1,500# Cap. •

• (12) Bishamon Port. Hyd. Scissor Lift Carts, 1,000# Cap. •

• Auto Quip Hyd. Upender, 2,000# Cap. •

• (8) Ass’t. Hyd. Pallet Jacks •

• Hobart, C & D, Larmarch & Building Battery Chargers •

• Caldwell Lift Cassy • Etc. Etc. • 

PLANT SUPPORT EQUIPMENT

• Millermatic Port. 200 Amp Arc Welder •

• Carolina Port. Hyd. Engine Hoist, 5,500# Cap. •

• Oster Pipe Threader, Mod. 999 • Tenant Elec. Floor Scrubber, Mod. 260XP •

• 32’ x 12’ Free Standing Crane, w/ 2 Ton Elec. Hoist •

• (2) 25’ I-Beam Runways, w/ 2 Ton Elec. Hoists •

• (25) Ass’t. CM & Yale Elec. Hoists, ½-2 Ton •

• (10) Chain Falls ½-2 Ton • Spreader Beams •

• Elec. & Pneu. Hand Tools Including: Drills, Saws,

Rotary Hammers, Grinders, Nailers, Etc. •

• (50) Section H.D. Steel Pallet Racking • Cantilever Racks •

• Metal Shelving • Howe Richardson Platform Scale, 6,000# Cap. •

• Reliant Port. Dust Collector NM720 • Rubbermaid Dump Hoppers, 2,500# Cap. •

• 2D Flameproof Cabinets • Cutting & Welding Outfits • (8) Port. Strapping Machines •

• Shop Vac’s • Port. Stock & Step Ladders • Dollies • Wheel Barrows • Hand & Barrel Trucks •

• (40) Platform Trucks 4’ & 5’ • Plastic Tote Bins • Pedestal Shop Fans • Storage Cabinets •

• Metal Parts Cabinets • Metal Foremans Desk • Welding & Workbenches • Lockers • Etc. Etc. •

• Electrical Parts & Accessories • Hardware • Pipe Fittings • Bearings • V-Belts • Motors •

• Embossing Rolls • Machine Parts • Etc. Etc. Etc. •

OFFICE MACHINES

• NEC Electra Phone System, Mod. ESF-H-10,

w/ Voicemail, P.C., Bogen Toner, w/ 40 Extensions •

• Xerox 5352 Copier, w/ Collator • (20) Pentium III & Pentium II P.C.’s •

• Compaq Proliant 3,000 Server • Compaq Proliant 2,500 Server •

• (7) HP LaserJet Printers #2100; 4050N; #1100; 4; 4L; 4P; 5P; •

• DeskJet 810C Printer • (4) Okidata Microline 590 Pin Printer •

• Intermel Label Printer, Mod. 3400 • P.B. 9930 & 2500 Fax Machines •

• Microwave Ovens • Refrigerator/Freezers •

• Color T.V. • VCR Player • Overhead Projector • Etc. Etc. •

OFFICE FURNISHINGS

• 8’ x 10’ Wood Conference Table •

• (12) Wood Exec. Desks • (12) Executive & Secretarial Metal Desks •

• (4) Modular Uph. Work Stations •

• Credenzas • Bookcases • Storage Cabinets •

• (50) Ass’t. Executive, Secretarial & Arm Chairs •

• (40) 2-3-4 & 5D Lateral File Cabinets •

• (20) 3-4 & 5D Metal File Cabinets •

• Chalkboards • Mail & Coat Racks • Etc. Etc. •