CNC UNIVERSAL MILLING MACHINES
• Maho
MA800E2 CNC Univ. Miller, 23” x 45” Tab, S/N 82463, 40 Taper,
5000
RPM, 31” x 21” x19” XYZ Travels, Maho CNC 432 CNC Control (New 1992) •
• Maho
MH800E CNC Univ. Miller, S/N 82074, 40 Taper, 3150 RPM,
31”
x 19” x 17” XYZ Travels, Maho CNC 432 CNC Control (New 1988) •
• Maho
1000C CNC Univ. Miller w/ Digitizing 31” x 49” Tab, S/N 16424, 50 Taper,
2000
RPM, 39” x 31” x 22” XYZ Travels, Maho CNC 432 CNC Control (New 1987) •
• Maho
700C CNC Univ. Miller, 21” x 36” Tab, S/N 75951, 40 Taper, 3150 RPM,
27”
x 19” x 17” XYZ Travels (New 1983) •
• Maho Digitizing Arm •
LATHES
• 2/
Howa 17” x 40” B.C. Lathes, 1500 RPM, IN/MM, 7½ H.P.,
M/N 1000, S/N 10250 & 10424 w/ Tooling •
• Mori
Seiki 17” x 33” B.C. Lathe, 1800 RPM, 5 H.P., M/N MS850G, S/N 8123 w/ Tooling •
• Acra
Turn 13” x 40” B.C. Lathe, 1300 RPM, IN/MM, 3 H.P., S/N 52308 w/ Coolant &
Tooling •
MILLING MACHINES
• Trak
TRM CNC Vertical Miller, Bed Type, 10” x 45” Table, S/N 93-195
w/
Prototrak MXZ Control, 3 H.P., Quick Switch Spindle •
• 2/ Bridgeport Series II Special Vertical
Millers, 11” x 58” Tab., Pow. Feed, S/N G308S & 5462S •
• Bridgeport Syncrotrace Miller, S/N 144532
w/ 2 Bridgeport 1½ H.P. Milling Heads 9” x 42”
Tab. •
• Bridgeport Vert. Miller, 9” x 42” Tab., Pow.
Feed, Vari-Sp., 1½ H.P., S/N 130283 •
• Bridgeport Series I Vertical Miller, 9” x
48” Tab., 2 H.P., S/N 226186 w/ Prototrak CNC Control •
• Lagun
FTV-2 Vertical Miller, 9” x 48” Tab, S/N SE9288
w/ Bridgeport
Series I Head, 2 H.P. w/ Prototrak MXZ CNC Control •
• Lagun
FT-3 Vertical Miller, 12” x 54” Tab., Pow. Feed, Vari-Sp., 3 H.P., S/N SE7071 •
• 2/ Lagun
FTV-2 Vertical Millers, 9” x 48” Tab., Pow. Feed, S/N SE14324
w/ Bridgeport
Head 1½ H.P. •
• Lagun
FTV-2 Vertical Miller, 9” x 48” Tab., Pow. Feed, S/N SE8182 •
• Lagun
T-3 Vertical Miller, 12” x 54” Tab., Pow. Feed, 2 H.P., S/N SE6627 •
• TOS
F24 Univ. Miller, 55” x 32” Tab., 59” Long Travel, 3400 RPM, S/N 72 •
SURFACE GRINDERS
• ELB
Star 1424 VA12 Auto. Surface Grinder, 14” x 24”, S/N 17147,
w/
13.5” x 23.5” Electromag Chuck, Overwheel Dresser,
Coolant
Sys. w/ Separator, Incremental Down Feed •
• B
& S #5 Surface Grinder, 8” x 24” Mag. Chuck, Excello Spindle •
BANDSAWS
• Kalamazoo Startrite 20RF Vertical Metal
Bandsaw, 3 Ph., S/N 64069 •
• W.T.
16” Vert. Metal Bandsaw, 3 Ph., S/N 22639 •
• Kalamazoo 10” x 18” Horiz. Metal Bandsaw,
M/N #9AW, S/N 12360 •
WELDER
•
Miller Synchrowave Port. 300 AC/DC 300 Amp Welder w/ Coolmate 12 Coolant •
COMPRESSOR
•
Champion 25 H.P., 3 Ph., Twin Cyl. Air Compressor, S/N 257754 •
INSPECTION EQUIPMENT
•
Yuasa 60” Vernier Caliper • Mitutoyo Vernier Calipers • Mitutoyo Dig. Ht. Gages
•
• Dial
Calipers & Gages • O.D., I.D. & Depth Micrometers • V-Blocks • Angle
Blocks •
• Gage
Blocks • Dial Indicators • Surface Plates • Etc. • Etc. •
TOOLING
• Kurt
& Bridgeport MM Vises • Troyke 16” Rotary
Table • Bridgeport 10” Rotary Table •
•
Lathe & Drill Chucks • Angle Plates • Collet Spinner • Collets • Boring
& Quill Heads •
•
Drill Index Sets • Bridgeport Tooling • Elec. & Pneu. Hand
Tools • Machine & Bench Vises • Etc. •
Perishable Tooling Including:
Drills, Reamers, Taps, End Mills, Cutters, Saw Blades, Etc., Etc.
|
WOODWORKING MACHINERY
•
Delta 10” Unisaw, Tilt Arbor, M/N 34-450, S/N DS772 • Powermatic 16” Planer, 5 H.P., 3 Ph. •
•
Rockwell 12” Planer, M/N 22-101, S/N DD2281 • American 20” Joiner, 3 Ph. •
• Wadkin
Overhead Router, 5 H.P., 3 Ph., S/N LQ862 • Delta 20” Vert. Bandsaw, 3 Ph. •
•
Blount 9” x 48” B.C. Wood Lathe, 3 Ph. • Cone Lathe 15” x 72” B.C., 3 Ph. •
•
State 20” Disc Sander, M/N H2347 • Kindt 24” Disc Sander, M/N 24-B, S/N 4034 •
• Apex
20” Disc Sander, M/N 20-D, S/N 3014 • State 9” Disc Sander, 1 Ph. •
MISCELLANEOUS MACHINERY
•
Empire Sand Blaster, M/N CAB 3660 w/ Dust Collector •
• Red
Arrow 12 Ton Hyd. Press, S/N 19136 •
•
Leland 26” Drill Press, Fl. Type, ½ H.P., 1 Ph. •
• W.T.
10” Drill Press, Fl. Type • Forbes & Myers D.E. Fl. Grinder, 1 Ph. •
PLANT SUPPORT EQUIPMENT
• Lift
Rite 4000# Hyd. Pallet Truck • Lee Vertical Lift Truck • Vertical Dye Truck •
• Yale
½ Ton Elec. Hoist • Port. Strapping Mach. • O’Hause Balance Scale • Port.
Platform Scale •
• Hand
Tools • C-Clamps • Wood Vises & Clamps • Hand Trucks • Port. Stock Carts •
•
Metal Shelving • Worktables, Benches & Cabinets • Met. Shop Stools • Etc. •
Etc. •
Ass’t Steel Stock w/ 10’
Cantilever Stock Rack
FORKLIFT
• Clark 3000# Cap. Elec. Forklift, 144”
Lift, 3768 Hrs. w/ Charger •
OFFICE MACHINES
• H.P.
DesignJet 750C Plus Plotter • Diazit Omni-120 Trac Blueprint Copier •
• Mita
DC 1435 Copier • Gateway PIII P.C. • Dell Laptop P.C. •
• H.P.
LaserJet 4100 Printer • Brother MFC-5100C Fax-Printer-Scanner •
• Panafax
UF333 Fax Mach. • Destroyit Paper Shredder •
•
Standard 2700 Checkwriter • Coca Cola 5 Unit soda Machine •
OFFICE FURNISHINGS
• 8’
Conference Table w/ 6 Uph. Chairs • 3/ 60” Sec. Desks w/ Returns •
• 72”
Wood Exec. Desk w/ Exec. Chair • 10/ 2D & 4D Met. File Cabinets •
• 6/
2D Met. Storage Cabinets • Schwab 1D Safe • Refrig. •
•
Draftsman Table w/ Instruments • Etc. • Etc. • |