|
2 DAY
|
|
A
|
P
U B L I C
U
C T I O
|
N
|
• PAPER BOX MACHINERY MANUFACTURER •
• MACHINE TOOLS •
• CNC MACHINING AND TURNING CENTERS •
• MILLERS • BORING & PLANER MILLS • LATHES •
• SAWS • GRINDERS • DRILLS • WELDERS • COMPRESSORS •
• METALWORKING MACHINES • WOODWORKING MACHINES •
• FORKLIFTS • BRIDGE CRANES • VEHICLES •
• INSPECTION EQUIPMENT • TOOLING • PLANT SUPPORT EQUIPMENT •
• GLUER, FOLDER-GLUER MACHINES & PARTS • STEEL STOCK •
• OFFICE MACHINES & FURNISHINGS •
(ASSETS NO LONGER REQUIRED BY NEW OWNERS OF)
THE INTERNATIONAL PAPER BOX MACHINE CO., INC.
90 NORTHEASTERN BOULEVARD NASHUA, NEW HAMPSHIRE
TO BE SOLD ON THE PREMISES
WEDNESDAY & THURSDAY, MAY 21ST & 22ND
STARTING AT 10:30 A.M. EACH DAY
Click here for ON-LINE CATALOG
TERMS OF SALE:
25% DEPOSIT CASH OR CERTIFIED CHECK
10% BUYERS PREMIUM APPLIES
OTHER TERMS TO BE ANNOUNCED AT TIME OF SALE
INSPECTION:
TUESDAY, MAY 20TH - 10:00 A.M. TO 4:00 P.M.
& MORNING OF EACH SALE - 8:30 A.M TO 10:30 A.M.
PAUL W. SCHEER, NH AUC. LIC.# 3073
|
MACHINERY& EQUIPMENT • TO BE SOLD DAY 1 • WEDNESDAY, MAY 21ST AT 10:30 AM
|
CNC HORIZONTAL MACHINING CENTERS
• Mazak Ultra 550 CNC Horiz. Machining Center, S/N 115476
w/ 5 Pallet Changing Table, 64 Pos. Auto Tool Changer,
Mazak CNC Controls (New 1995) •
• Toyoda FHN-4011 CNC Horiz. Machining Center, S/N NM5876,
32 Pos. Auto Tool Changer, 1º Indexing, 24" x 22" x 19" Travel
w/ 2 Pallet Style Tables, Fanuc 6M CNC Controls w/ Tooling •
• K & T Milwaukee-Matic EA Horiz. Machining Center, S/N 83-0008-07
w/ Pow. Feed, Indexing Tab, Remote NC Controls •
• K & T VMC 660 Vertimatic 4500 Horiz. Machining Center, S/N 60126
w/ AB NC Controls & Tooling •
CNC VERTICAL MACHINING CENTERS
• Okuma & Howa 4VA Vert. CNC Machining Center, S/N 02075
w/ 25 Pos. Auto Tool Changer w/ 16" x 28" Pow. Table,
Fanuc 6M CNC Controls & Tooling •
• Hurco BMC30HT/M Vert. CNC Machining Center, S/N QT9W3015R
w/ 24 Pos. Auto Tool Changer, Hurco Ultimax CNC Controls & Tooling •
• Hurco BMC25 Vert. CNC Machining Center, S/N BP9001081K
w/ 24 Pos. Auto Tool Changer, 16" x 24" Pow. Table,
Hurco Ultimax CNC Controls & Tooling •
• Hurco BMC20 Vert. CNC Machining Center, S/N BN-9003090A
w/ 16 Pos. Auto Tool Changer, 16" x 34" Pow. Table,
Hurco Ultimax II CNC Controls & Tooling •
• Hurco BMC20LR Vert. CNC Machining Center, S/N ZA9003111E
w/ 16 Pos. Auto Tool Changer, 16" x 34" Pow. Table,
Hurco Ultimax II CNC Controls & Tooling •
CNC TURNING CENTERS
• Yamazaki Mazak CNC Turning Center, Mod. SQT-30M, S/N 114532 (New 1994)
w/ 12" Chuck, 12 Pos. Turret, Tooling, Mazak Mazatrol T-PL CNC Controls &
Tooling w/ Chip Conveyor •
• Okuma LC-40 CNC Turning Center, S/N 6303-1557 w/ Programmable Tail Stock,
15" Chuck, 12 Pos. Turret, Okuma OSP5000LG CNC Controls & Tooling
w/ Henning 1100M Chip Conveyor •
• Mori-Seiki SL-4 CNC Turning Center, S/N 442 w/ Man. Tail Stock, 8 Pos. Turret,
12" Chuck w/ Yasnac CNC Controls & Tooling •
• Mazak QT-28N-U CNC Turning Center, S/N 87819 (New 1994)
15 Station Turret, Programmable Tail Stock, 2.625 Cap. Collet Chuck,
w/ LNS Hydrobar Bar Feeder, 6 Bar Cap., Mazak Mazatrol T32-2
CNC Controls & Tooling •
HORIZONTAL BORING MILL
• G & L 340T Horiz. Boring Mill, 4" Spindle, 36" x 118" Table, 60" Vert. Travel,
S/N 7402 w/ Itex Digiline D.R.O. •
PLANER MILL
• Gray 4 Head Planer Mill, S/N 9125 w/ 50" x 144" Table, L & R Side Mt. Heads, 25 H.P.,
2/ Univ. Overhead Rail Mt. Heads, 25 H.P. •
MILLING MACHINES
• TRAK CNC Vert. Miller, Mod. DPM, S/N 95211
w/ 9" x 60" Pow. Feed Table & Pro-Trak MX3, 3 Axis CNC Control •
• Sharp CNC Vert. Miller, Mod. HMX, S/N 80060030
w/ 9" x 48" Pow. Feed Table & Pro-Trak Plus 2 Axis CNC Control •
• 3/ Bridgeport Series I Vert. Millers, 9" x 42" Table, Pow. Feed,
S/N 2311688, S/N 28889, S/N 28199 w/ Mitutoyo D.R.O.'s •
• Bridgeport Vert. Miller, 9" x 42" Table, S/N 12BR74851 w/ Anilam 2 Axis D.R.O. •
• 2/ Bridgeport Vert. Millers, 9" x 32" Table, S/N 81430, 24399, 75477 •
• Cincinnati Hydrotel Vert. Miller, S/N 1H8V1R-4 w/ 30" x 120" Table •
• Cincinnati 205-10-MI Plain Miller, S/N 2J2R5H-11 w/ Pow. Feed •
• Nichols Horiz. Hand Miller w/ Hyd. Feed •
• K & T Horiz. Miller, M/N 430-TF-20, S/N 5-9315 w/ 20" x 85" Pow. Feed Table •
• K & T Horiz. Miller, M/N 625F, S/N 10-8483 w/ Pow. Feed Prod. Table •
• Cincinnati Vert. Miller, M/N 430-20, S/N 4J4V5M-3 w/ 20" x 86" Pow. Feed Prod. Table •
• Van Norman Univ. Miller, M/N 38MA, S/N 4370-1264 w/ 14" x 42" Table •
CYLINDRICAL GRINDERS
• Norton 14" x 72" Cyl. Grinder, M/N 1472/LCTU, S/N 27720 •
• Norton 10" x 72" Cyl. Grinder, M/N 1072CTA, S/N 10X2C1025L40 •
SURFACE GRINDERS
• Blanchard Rotary Surface Grinder, M/N 22AK-42, S/N 15591 w/ 42" Mag. Chuck & Coolant •
• Taft Pierce Rotary Surface Grinder, 6" Mag. Chuck •
• Jakobsen Auto Surface Grinder, 10" x 30" Mag. Chuck, M/N SJ8030, S/N JX1006 •
• B & S Surface Grinder, 6" x 18" Mag. Chuck, M/N 618 •
• Reid Walker Surface Grinder, 6" x 18" Mag. Chuck, M/N 6184, S/N 10167 •
GRINDERS • SANDERS
• Cinn. Tool & Cutter Grinder, M/N 2 • Oliver Tool Grinder, M/N 300HD •
• Diamond Carbide Tool Grinder, M/N 230 • Delta Carbide Tool Grinder, M/N X1650 •
• Delta Carbide Tool Grinder, M/N 23-505 • Chevalier Tool Grinder •
• Rush Drill Bit Sharpener, M/N 252 • Hisey Wolf Drill Bit Sharpener, M/N 3JJWA •
• 10/ Ass't D.E. Pedestal & Bench Grinders • 20/ Ass't D.E. Pedestal & Bench Sanders/Buffers •
• Etc. • Etc. •
GEAR HOBBERS
• 3/ Barber Coleman 16" x 16" Horiz. Gear Hobbers, M/N 16/16, S/N 1981, 3775R, 3861 •
• Becher Brainerd Horiz. Gear Hobber •
• Fellows Gear Shaper, 18" Cap., M/N 615A, S/N 328803366 •
• Gould & Eberhardt 20" Cap. Gear Shaper, S/N 2645A2 •
LATHES
• Hankook Engine Lathe, 28" x 120" B.C., Hollow Spindle, Turnvision,
Mod. Protek, S/N R88-71 w/ Vision 2 Axis D.R.O. •
• American Engine Lathe, 14" x 150" B.C., Hollow Spindle, Mod. Zipshift,
S/N 77367/64 w/ 2 Axis D.R.O. •
• American Engine Lathe, 20" x 96" B.C., Mod. Pacemaker
S/N 74429/55 w/ Mitutoyo 2 Axis D.R.O. •
• Harrison Engine Lathe 17" x 84" B.C., Mod. M400-RPT, S/N 406313-5057 w/ Anilam D.R.O. •
• LeBlond Engine Lathe, 15" x 54" B.C., S/N 9C251 w/ Acu-Rite 2 Axis D.R.O. •
• SouthBend Engine Lathe, 14" x 48" B.C., S/N 1956HKR8 •
• Delta Engine Lathe 12" x 36" B.C. •
• Bradford Engine Lathe, 16" x 48" B.C., S/N 6396 •
• Hardinge Second Operation Lathe, Vari-Sp., M/N DSM-59, S/N 59-130
w/ 6 Station Turret & Collet Closer •
• B & S Second Operation Lathe •
TURRET LATHES
• J & L Univ. #3 Turret Lathe 21" Swing, S/N 201121 •
• J & L Univ. #5-3 Turret Lathe, S/N L22-352 w/ Bar Feed & Anilam D.R.O. •
• J & L Univ. #7A-3 Turret Lathe, S/N 210340 w/ Bar Feed & Teledyne Pathfinder D.R.O. •
• J & L Univ. #7A-3 Turret Lathe, S/N 222651 w/ Anilam D.R.O. •
BAND SAWS
• Kysor Johnson 10" x 12" Horiz. Met. Band Saw, M/N HA250, S/N 453845
w/ Coolant & Power In & Out Feed Conveyors •
• DoAll 26" Vert. Met. Band Saw, M/N 26-3, S/N 128-59138 w/ Pow. Feed Table •
• DoAll 12" Vert. Met. Band Saw, M/N VS-16, S/N 38255 •
• Powermatic 12" Vert. Met. Band Saw, M/N 143, S/N 2-531 •
• Dake Johnson 16" Vert. Met. Band Saw, M/N V-16, S/N 194242 •
• 3/ Delta 12" Vert. Met. Band Saws, S/N 84-6050. BU8166, 26-66490 •
RADIAL ARM DRILLS
• Carlton 3A Rad. Arm Drill, 5' x 15" Column, S/N 4591 w/ 36" x 144" Table •
• American Hole Wizard Rad. Arm Drill, 4' x 11" Column, S/N 68304-44 •
• W.T. Rad. Drill, M/N 1616-2, S/N 0000557 •
DRILLING MACHINE
• Cleerman Versimatic Layout Drill Mach. w/ D.R.O. •
WELDERS
• Miller Shopmaster 300 Welding Power Source, 300 Amps AC/DC
w/ Wire Feeder & Hi Freq. Arc Starter •
• Miller Micromaster 300 Welding Power Source, 300 Amp
w/ Wire Feeder & Hi Freq. Arc Starter •
• 2/ Miller Port. Millermatic 250 Amp DC Arc Welder •
• Lincoln Port. Mig. Welder, M/N SB100 •
• L-Tech Port. Plasma Cutter, Mod. PCM-VPI •
• Ames 50KVA Spot Welder, M/N MIGAPTC •
• Air Craft Welding Positioner, Mod. 2A •
PRESS BRAKE
• Adira CNC 10' Hyd. Press Brake, 100 Ton Cap., M/N QH-9030, S/N 1492/3358
w/ CNC Back GA., Dyna Bend Single Axis D.R.O. & Dies •
SHEAR
• Niagara 10' Power Squaring Shear, 10 GA., M/N IR-10, S/N 64575
w/ Pow. Back GA. & Sq. Arm •
PUNCH
• Strippit 30 Ton CNC Single Point Punch, M/N Super AC 30/30, S/N 2207092188D
w/ CNC Controls & Tooling •
METALWORKING MACHINERY
• IPB Bending Roll 36" x 11 GA. Cap., Vari-Sp. •
• Pexto 36" Slip Roller • Chicago 8' Finger Brake •
• DiAcro Man. Bender w/ Dies • Custom Hyd. Bender •
• Parker Hannifin Elec./ Hyd. Fitting Crimper w/ Dies •
• Atnis Corner Notcher • Ass't Hand Tools • Etc. • Etc. •
PAINT BOOTHS
• Vinck 15' x 15' Paint Booth w/ 10 H.P. Blower, Explosion Proof Lights,
Water Bath Filter, Paint Spray Equipment •
• 2/ Devilbiss 12' Paint Spray Booths w/ Paint Spray Equipment •
AIR COMPRESSORS
• Gardner Denver Rotary Screw Air Compr., 200 H.P. w/ Hankison Air Dryer •
• Ingersoll-Rand Air Compr., 15 H.P., 3 Ph. •
• Iwata Air Compr., 5 H.P., 3 Ph., M/N SP-55PB •
WASTE WATER TREATMENT SYSTEM
w/ Nordale Evaporator, Blower, Sump Pump, Filters & Treatment Tank •
BRIDGE CRANES
• C & M Lodestar 2 Ton Double Girder Traveling Bridge Crane,
40' Span x 240' Travel w/ 2 Ton Elec. Hoist, Pendant Controls •
• Spanmaster 2 Ton Double Girder Traveling Bridge Crane,
40' Span x 110' Travel w/ 2 Ton elec. Hoist, Pendant Controls •
• Spanmaster 2 Ton Double Girder Traveling Bridge Crane,
40' Span x 150' Travel w/ 2 Ton elec. Hoist, Pendant Controls •
• Coffing 1 Ton Double Girder Traveling Bridge Crane,
25' Span x 30' Travel w/ 1 Ton elec. Hoist, Pendant Controls •
• Spanmaster 1 Ton Single Girder Traveling Bridge Crane,
40' Span w/ 1 Ton elec. Hoist, Pendant Controls •
MISCELLANEOUS MACHINERY
• Sunnen Honing Mach., M/N MBB-1600 w/ Mandrels •
• Knight Jig Borer, M/N 50 w/ Anilam D.R.O. •
• 2/ Burgmaster 5 Spindle Turret Drills, M/N 1D •
• Delta & Allen Multi Spindle Drill Presses •
• 15/ Ass't Delta Pedestal & Bench Drill Presses •
• Trinco Bead Blaster w/ Dust Collector • Sweco Vib. Finishing Mill •
• 2/ Schmidt Pneu. Marking Mach.'s, M/N 25 • Torit & Tepco Dust Collectors •
• Greenerd Arbor Presses • Dayton Pantograph Engraver • Etc. • Etc. •
PLANT SUPPORT EQUIPMENT
• 12 Station Solvent Lube Dispensing Sys. •
• Power America Port. Pressure Washer • FMC Floor Sweeper, Prop., M/N 60 •
• 20/ Ass't Tool Cabinets • 12/ Port. Self Dumping Hoppers, 1-2 Yd. •
• 12/ Jib Cranes 1 Ton • Hyd. Pallet Trucks • Dye Trucks •
• Cantilever Steel Stock Racks • 50/ Sections Pallet Racking •
• 100/ sections Metal Shelving • Flameproof Cabinets • Cut & Weld Outfits •
• Strapping Mach.s • Safety, Stock, Ext. & Step Ladders •
• Barrel & Hand Trucks • Fairbanks Platform Scale •
• 2/ Digital Counting Scales • Elec. & Pneu. Drills, Sanders, Grinders, Nailers, Staplers •
• Jig Saws • Blowers • Socket Sets • Pipe Reamers, Threaders & Dies •
• C-Clamps • Port. Smog Hog • Port. Fume Detector • Clear Burn Waste Oil Burner, 275 Gal. •
• Port. Carts • Met. Storage Cabinets • Pedestal Fans • Shop Vac.'s •
• 300/ 6' Metal Lockers • Eye Wash Stations • Workbenches • Etc. • Etc. •
HANDLING EQUIPMENT
• CAT Forklift, 5000# Cap., Sol. Tires, Prop., M/N T50B •
• CAT Forklift, 3000# Cap., Sol. Tires, Prop., M/N TC30 •
• Clark Forklift, 4000# Cap., Sol. Tires, Prop., M/N C40B •
• 2/ Prime Mover Elec. Pallet jacks, 6000# Cap. w/ Chargers •
• L.S. Elec. Walk Behind Crane w/ Vandro Hyd. Boom, 1500# Cap. •
• Clark Tugger, Pneu. Tires, Gas, M/N CT40 •
• Genie Manlift, 300# Cap., M/N PEU15DC •
 I. H. 3850 Wheel Loader, S/N 1261 w/ G.P. Bucket
VEHICLES
• 1994 Ford E-350 Econoline Cargo Van •
• 1988 Ford E-350 Econoline Cargo Van •
• 1979 Ford F250 Rack Truck w/ Sand Spreader & 8' Plow •
Large Qty. Steel & S.S. Stock: Round, Flat, Bar & Angle
|
TO BE SOLD DAY 2 • THURSDAY, MAY 22ND AT 10:30 AM
|
INSPECTION EQUIPMENT & TOOLING
• Rockwell Hardness Tester • Mitutoyo Ht. Master •
• Mitutoyo Surface Roughness Tester, #401 • Riser Blocks •
• B & S Hite Chek Gage • Sunnen Hole Gages • Ht. Gages •
• Vernier Calipers • Micrometers • Pin Gage Sets • Gage Blocks •
• Step & V-Blocks • Dial Indicators • Plug, Thread & Snap Gages •
• Angle Plates • Parallels • Boring Heads • Indexing & Dividing Heads •
• Quill Heads • Rotary Tables • Granite Surface Plates • M.M. Vises •
• Machine & Bench Vises • Collets • Chucks • Tool Holders • Hold Downs •
• Stamp Sets • Ass't Drills, Reamers, End Mills, Taps, Cutters. Etc. • Etc. •
ELECTRONICS EQUIPMENT
• 4/ Tektronix Oscilloscopes • Multimeters •
• Sweep Function Generators • Power Supplies •
• Zewo Bench Lathe • Bench Grinders & Drills •
• Lab Benches • Parts Cabinets •
• Gd. Qty. Electronics & Electrical Supplies & Accessories • Etc. • Etc. •
PHOTOGRAPHIC EQUIPMENT
• Omega Color Enlarger • Olympus 35 MM Cameras •
• Polaroid 1D Camera • Ass't Lenses • Flashes •
• Darkroom Lights • Video Camera • VCR • Ass't Film •
• 8/ Photo Exposure Lights w/ Tripods • Etc. • Etc. •
INVENTORY
• IPBM Swifty™ Right Angle Gluer • IPBM 52" Speed King Straight Line Gluer •
• Staude™ Master Carton Gluer • 2/ Multifold AutoLoader™ Carton Packers •
• Multifold 4026 Uni-Feeder • Multifold Carton Turnover System for UniFeeder •
• IPBM Universal Queen Transfer Section • Escomat™ Jet Packer •
• IPBM 8CH Stacker for Window Machine • IPBM FCJ Suction Feeder for Staude Master •
• 3/ 6' Hytrol Roller Conveyors • Multifold Robotic Packer • Multifold Large Carton Loader •
• Multifold Corrugated Stacker/Bundler • Multifold Lock Bottom Packer •
• Misc. Motors & Gluer Controllers • Etc. • Etc. •
WOODWORKING MACHINERY
• Oliver 20" x 48" BC Wood Lathe, M/N 25B, S/N 77-58 •
• Oliver 18" Planer, M/N 399-18, S/N 67518 •
• Oliver 16" Jointer, M/N 166CA, S/N 70418 •
• Oliver 24" Vert. Band Saw, M/N 217D, S/N 72637 •
• Whitney 10" Tilt Arbor Tab. Saw, M/N 177, S/N 15750 •
• Beech 22" Swing Arm Saw, 10 H.P., 3 Ph., S/N 47F04 •
• P.C. Ped. Spindle Sander, M/N 551, S/N 1016 •
• Boice Crane Oscillating Spindle Sander, M/N 3501 •
• New Eleven 36" Pinch Roller, M/N SP-97 •
OFFICE MACHINES & FURNISHINGS
• Lucent Definity Phone Sys. w/ 65 Hand Sets •
• 20/ Ass't P.C.'s w/ Monitors, Keyboards, Mouse & Speakers •
• LaserJet Printers • Scanners • Fax Mach. • Shredder •
• 12' Conference Table w/ 12 Exec. Swivel Chairs •
• 10' Conference Table w/ 12 Exec. Chairs •
• 6' Oval Conference Table w/ 6 Uph. Chairs •
• 10/ Cherry Exec. Desks • 50/ Sec. & Exec. Desks • Credenzas •
• 100/ Met. Vert. & Lateral File Cabinets 2D-5D • Blueprint & Storage Cabinets •
• Bookcases • 150/ Sec. & Exec. Chairs • Drafting Tables • Office, End & Computer Tables •
• Sofa's • Coat Racks • Desk Lamps • Time Clocks • 2D Safe •
• Marking & Bulletin Boards • Calculators • Typewriters • Microfiche Viewers •
• Color T.V.'s • Refrigerators • Etc. • Etc. •
CAFETERIA EQUIPMENT
• Classic 2D S.S. Refrig./Freezer, Self Cont. •
• Traulsen 1D S.S. Refrig. Self Cont. •
• Traulsen Glass Door Refrig., Self Cont. •
• Lang S.S. 1D Convection Oven • GE Microwave Oven •
• Kelvinator 6 Hole Ice Cream Freezer • Bunn S.S. Coffeemaker •
• Hobart 4 Slice Toaster • Connolly Hot Dog Mach. •
• 24' Cafeteria Serving Line w/ Steam Table, Bain Marie, Sneeze Guard •
• Food Warming Lights • S.S. Pans • 12/ 6' Formica Top Tables •
• 80/ Stack Chairs • Royal Cash Reg. • Etc. • Etc. •
|
Click here for Location Maps
|
INSPECTION:
TUESDAY, MAY 20TH - 10:00 A.M. TO 4:00 P.M.
WEDNESDAY, MAY 21ST - 8:30 A.M. TO 10:30 A.M.
THURSDAY, MAY 22ND - 8:30 A.M. TO 10:30 A.M.
AIRPORT:
LOGAN INTERNATIONAL AIRPORT
BOSTON, MA 1-800-23-LOGAN
MANCHESTER AIRPORT
MANCHESTER, NH 1-603-624-6539
DIRECTIONS:
FROM LOGAN INTERNATIONAL AIRPORT – (APPROX. 44 MILES TO SITE) TAKE I-95 S./MA-128 S. TOWARDS WALTHAM. TAKE EXIT #32B, US-3 N./ MIDDLESEX TPK. TOWARDS LOWELL. MERGE ONTO US-3 N. TAKE EXIT #4 TOWARDS E. DUNSTABLE RD./F.A.A. CENTER. TAKE THE E. DUNSTABLE RD. RAMP TOWARD F.A.A. CENTER. TURN LEFT ONTO E. DUNSTABLE RD. TURN RIGHT ONTO HARRIS RD. TURN SLIGHT RIGHT ONTO NORTHEASTERN BLVD. WATCH FOR AUCTION SIGNS.
FROM MANCHESTER AIRPORT – (APPROX. 18 MILES TO SITE) START NORTH ON BROWN AVE./NH-3A TOWARD CASCADE CIR. MERGE ONTO NH-101 W. VIA RAMP ON LEFT TOWARD BEDFORD/NASHUA. TAKE EVERETT TPK SOUTH EXIT TOWARD MERRIMACK/NASHUA. MERGE ONTO FREDERICK E. EVERETT TPK. FREDERICK E. EVERETT TPK. BECOMES US-3 S. TAKE EXIT #5W , RT.-111 W. TOWARDS PEPPERELL, MA. RAMP BECOMES NH-111A. TURN LEFT ONTO NORTHEASTERN BLVD. WATCH FOR AUCTION SIGNS.
FROM ALBANY, NY – (APPROX. 185 MILES TO SITE) TAKE I-90 E APPROX. 125 MILES. TAKE EXIT #10 TOWARDS I-290/WORCESTER/I-395/OXFORD/WEBSTER. MERGE ONTO I-290 E TOWARDS WORCESTER. TAKE EXIT 26B ON LEFT TO I-495 TOWARDS LOWELL. TAKE EXIT #33 TO RT 4 N TOWARDS N. CHELMSFORD. TURN LEFT ONTO NORTH RD./MA-4 N. ENTER ROTARY AND TAKE 3RD EXIT. STAY STRAIGHT TO GO ONTO US-3 N. TAKE EXIT #4 TOWARDS E. DUNSTABLE RD/F.A.A. CENTER. TAKE THE E. DUNSTABLE RD RAMP TOWARDS F.A.A. CENTER. KEEP LEFT AT FORK IN RAMP. TURN LEFT ONTO DUNSTABLE RD. TURN RIGHT ONTO HARRIS RD. TURN SLIGHT RIGHT ONTO NORTHEASTERN BLVD. WATCH FOR AUCTION SIGNS.
FROM HARTFORD, CT – (APPROX. 115 MILES TO SITE) TAKE I-84 E. MERGE ONTO I-90 E/MASS. TURNPIKE TOWARDS N.H.-MAINE/BOSTON. TAKE EXIT #10 TOWARDS WORCESTER. MERGE ONTO I-290 E TOWARDS WORCESTER. TAKE EXIT 26B ON LEFT TO I-495 TOWARDS LOWELL. TAKE EXIT #33 TO RT 4 N TOWARDS N. CHELMSFORD. TURN LEFT ONTO NORTH RD./MA-4 N. ENTER ROTARY AND TAKE 3RD EXIT. STAY STRAIGHT TO GO ONTO US-3 N. TAKE EXIT #4 TOWARDS E. DUNSTABLE RD/F.A.A. CENTER. TAKE THE E. DUNSTABLE RD RAMP TOWARDS F.A.A. CENTER. KEEP LEFT AT FORK IN RAMP. TURN LEFT ONTO DUNSTABLE RD. TURN RIGHT ONTO HARRIS RD. TURN SLIGHT RIGHT ONTO NORTHEASTERN BLVD. WATCH FOR AUCTION SIGNS.
FROM SPRINGFIELD, MA – (APPROX. 105 MILES TO SITE) TAKE I-291 N. TAKE I-90 MASS TURNPIKE TOWARDS LUDLOW/BOSTON. MERGE ONTO I-290 E TOWARDS WORCESTER. TAKE EXIT 26B ON LEFT TO I-495 TOWARDS LOWELL. TAKE EXIT #33 TO RT 4 N TOWARDS N. CHELMSFORD. TURN LEFT ONTO NORTH RD./MA-4 N. ENTER ROTARY AND TAKE 3RD EXIT. STAY STRAIGHT TO GO ONTO US-3 N. TAKE EXIT #4 TOWARDS E. DUNSTABLE RD/F.A.A. CENTER. TAKE THE E. DUNSTABLE RD RAMP TOWARDS F.A.A. CENTER. KEEP LEFT AT FORK IN RAMP. TURN LEFT ONTO DUNSTABLE RD. TURN RIGHT ONTO HARRIS RD. TURN SLIGHT RIGHT ONTO NORTHEASTERN BLVD. WATCH FOR AUCTION SIGNS.
FROM WORCESTER, MA – (APPROX. 50 MILES TO SITE) MERGE ONTO I-290 E TOWARDS MARLBORO/I-190. TAKE EXIT 26B ON LEFT TO I-495 TOWARDS LOWELL. TAKE EXIT #33 TO RT 4 N TOWARDS N. CHELMSFORD. TURN LEFT ONTO NORTH RD./MA-4 N. ENTER ROTARY AND TAKE 3RD EXIT. STAY STRAIGHT TO GO ONTO US-3 N. TAKE EXIT #4 TOWARDS E. DUNSTABLE RD/F.A.A. CENTER. TAKE THE E. DUNSTABLE RD RAMP TOWARDS F.A.A. CENTER. KEEP LEFT AT FORK IN RAMP. TURN LEFT ONTO DUNSTABLE RD. TURN RIGHT ONTO HARRIS RD. TURN SLIGHT RIGHT ONTO NORTHEASTERN BLVD. WATCH FOR AUCTION SIGNS.
FROM PROVIDENCE, RI – (APPROX. 80 MILES TO SITE) TAKE I-95 N. APPROX. 55 MILES. MERGE ONTO US-3 N EXIT #32A TOWARDS LOWELL/NASHUA N.H. TAKE EXIT #4 TOWARDS E. DUNSTABLE RD/F.A.A. CENTER. TAKE THE E. DUNSTABLE RD RAMP TOWARDS F.A.A. CENTER. KEEP LEFT AT FORK IN RAMP. TURN LEFT ONTO DUNSTABLE RD. TURN RIGHT ONTO HARRIS RD. TURN SLIGHT RIGHT ONTO NORTHEASTERN BLVD. WATCH FOR AUCTION SIGNS.
FROM PORTSMOUTH, NH – (APPROX. 65 MILES TO SITE) TAKE I-95 S LEFT RAMP. TAKE EXIT 59 TO I-495 S TOWARDS WORCESTER. STAY STRAIGHT TO GO ONTO I-495 S. TAKE EXIT # 35BA/36 TO US-3/LOWELL CONNECTOR TOWARDS NASHUA, NH/BURLINGTON. TAKE THE US-3 S/US-3 N RAMP TOWARD NASHUA N.H. MERGE ONTO US-3 N. TOWARDS NASHUA, N.H. TAKE EXIT #4 TOWARDS E. DUNSTABLE RD/F.A.A. CENTER. TAKE THE E. DUNSTABLE RD RAMP TOWARDS F.A.A. CENTER. KEEP LEFT AT FORK IN RAMP. TURN LEFT ONTO DUNSTABLE RD. TURN RIGHT ONTO HARRIS RD. TURN SLIGHT RIGHT ONTO NORTHEASTERN BLVD. WATCH FOR AUCTION SIGNS.
LODGING:
HOLIDAY INN, NASHUA, NH 1-603-888-1551
SHERATON NASHUA HOTEL, NASHUA, NH 1-603-888-9970
CROWN PLAZA, NASHUA, NH 1-603-886-1200
TERMS & CONDITIONS:
EVERYTHING SOLD "AS IS/WHERE IS"
EVERYTHING SELLS TO THE HIGHEST BIDDER – NO CONFIRMATION
TERMS OF SALE:
25% DEPOSIT AT TIME OF SALE BY CASH OR CERTIFIED OR BANK WIRE TRANSFER. 10% BUYERS PREMIUM APPLIES. PERSONAL OR COMPANY CHECK ACCEPTED ONLY IF ACCOMPANIED WITH A BANK LETTER GUARANTEEING PAYMENT. EXAMPLE OF BANK LETTER OF GUARANTEE: THIS BANK GUARANTEES PAYMENT TO AARON POSNIK & CO., INC. ON ACCOUNT # ______UP TO THE AMOUNT OF $ ______ FOR PURCHASES MADE AT THE INTERNATIONAL PAPER BOX MACHINE CO., INC. AUCTION TO BE HELD ON MAY 21ST AND 22ND. NO PURCHASE REMOVED UNTIL COMPLETE SETTLEMENT IS MADE. OTHER TERMS TO BE ANNOUNCED AT TIME OF SALE.
BID BY MAIL: IF YOU CANNOT ATTEND THIS AUCTION IN PERSON WE WILL BE HAPPY TO RECEIVE YOUR BID ON THE ITEMS THAT YOU DESIGNATE (IF YOUR BID IS SENT BY MAIL OR FAX AND RECEIVED BY OUR OFFICE AT LEAST 24 HOURS PRIOR TO THE COMMENCEMENT OF THE SALE). IF YOU WISH TO BID BY MAIL, KINDLY PROVIDE A COMPLETE LIST OF THE ITEMS DESIRED AND ENCLOSE A 25% DEPOSIT BY CERTIFIED CHECK. YOU WILL BE RESPONSIBLE FOR PURCHASES IF YOU ARE THE HIGH BIDDER, UNDER THE TERMS AND CONDITIONS TO BE ANNOUNCED AT TIME OF SALE. IF YOU ARE THE SUCCESSFUL BIDDER, WE WILL NOTIFY YOU WITHIN 24 HOURS OF THE SALE AND YOU MUST MAKE PAYMENT OF THE BALANCE DUE BY WIRE TRANSFER TO OUR BANK WITHIN 24 HOURS OF NOTIFICATION. IF YOU ARE UNSUCCESSFUL IN YOUR BID, YOUR DEPOSIT WILL BE RETURNED TO YOU WITHIN 72 HOURS OF THE SALE.
IMPORTANT NOTICE: THE INFORMATION DESCRIBED IN THIS BROCHURE IS CORRECT TO THE BEST OF OUR KNOWLEDGE BUT WE CANNOT GUARANTEE SAME. IT IS FOR THIS REASON THAT BUYERS SHOULD AVAIL THEMSELVES OF THE OPPORTUNITY FOR INSPECTION PRIOR TO THE SALE.
PAUL W. SCHEER, NH AUC. LIC.# 3073
|
Top
Back to COMMERCIAL Calendar
Back to INDUSTRIAL Calendar
|
Corporate
Office
83 State Street
Springfield, MA
01103
1-413-733-5238
Fax:1- 413-731-5946 | 
Aaron Posnik & Co., Inc.
Established 1932
| Philadelphia
Office
5 Great Valley Road
Suite 244, Malvern, PA
19355
1-610-853-6655
Fax: 1-610-853-6633 | |
Mass
Auc. Lic. #161• www.posnik.com • E-mail: info@posnik.com •
PA Auc. Lic. # AU-0038-R
| | |
|
